MSK611 Datasheet, PDF (1/4 Pages) M.S. Kennedy Corporation – ULTRA HIGH SLEW RATE HIGH VOLTAGE AMPLIFIER

ISO 9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
ULTRA HIGH SLEW RATE
HIGH VOLTAGE AMPLIFIER
4707 Dey Road Liverpool, N.Y. 13088
611
[phone]
FEATURES:
Low Quiescent Current - ±25mA for High Voltage Stage
110V Peak to Peak Output Voltage Swing
Slew Rate - 6000V/µS Typical @ 100Vpp
Small Signal Rise Time - 6nS Typical
Power Output Frequency - 7 MHz Typical
Output Current - 150mA Peak
Adjustable VHV Power Supply Minimizes Power Dissipation
Compact Package Offers Superior Power Dissipation
MIL-PRF-38534 QUALIFIED
DESCRIPTION:
The MSK 611 is a high voltage ultra high slew rate amplifier designed to provide large voltage swings in wideband
systems. The true inverting op-amp topology employed in the MSK 611 provides excellent D.C. specifications such
as input offset voltage and input bias current. These attributes are important in amplifiers that will be used in high
gain configurations since the input error voltages will be multiplied by the system gain. The MSK 611 achieves
impressive slew rate specifications by employing a feed forward A.C. path through the amplifier, however, the device
is internally configured in inverting mode to utilize this benefit. Internal compensation for gains of -5V/V or greater
keeps the MSK 611 stable in this range. The MSK 611 is packaged in a space efficient, hermetically sealed, 12 pin
power dual in line package that has a high thermal conductivity for efficient device cooling.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Wideband High Voltage Amplifier
High Resolution CRT Monitor
Ultra High Performance Video Processing
CRT Beam Intensity Control
Varactor Tuned VCO Driver
Automatic Test Equipment
PIN-OUT INFORMATION
1 COMP
12
2 +VCC
11
3 GROUND
10
4 N/C
9
5 -INPUT
8
6 N/C
7
1
+VHV
+VSC
OUTPUT
CASE/GROUND
-VSC
-VCC
Rev. B 8/00