MSK604 Datasheet, PDF (1/6 Pages) M.S. Kennedy Corporation – NEGATIVE OUTPUT WIDE BANDWIDTH HIGH VOLTAGE AMPLIFIER

ISO 9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
NEGATIVE OUTPUT
WIDE BANDWIDTH
HIGH VOLTAGE AMPLIFIER
604
4707 Dey Road Liverpool, N.Y. 13088
[phone]
FEATURES:
Negative Going Output Voltage
Ultra Low Quiescent Current - ±10mA for High Voltage
95V Peak to Peak Output Voltage Swing
Slew Rate - 3000V/µS Typical
Full Power Output Frequency - 2 MHz Typical
Output Current - 250mA Peak
Adjustable - VHV Power Supply Minimizes Power Dissipation
Compact Package Offers Superior Power Dissipation.
MIL-PRF-38534 QUALIFIED
DESCRIPTION:
The MSK 604(B) is a high voltage wideband amplifier designed to provide large negative voltage swings at high
slew rates in wideband systems. The true inverting op-amp topology employed in the MSK 604 provides excellent
D.C. specifications such as input offset voltage and input bias current. These attributes are important in amplifiers
that will be used in high gain configurations since the input error voltages will be multiplied by the system gain. The
MSK 604 achieves impressive slew rate specifications by employing a feed forward A.C. path through the amplifier;
however, the device is internally configured in inverting mode to utilize this benefit. Internal compensation for gains
of -5V/V or greater keeps the MSK 604 stable in this range. The MSK 604 is packaged in a space efficient,
hermetically sealed, 12 pin power dual in line package that has a high thermal conductivity for efficient device cooling.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Wideband High Voltage Amplifier
High Resolution CRT Monitor Grid Drive
Ultra High Performance Video Processing
CRT Beam Intensity Control
Varactor Tuned VCO Driver
Automatic Test Equipment
PIN-OUT INFORMATION
1 COMP
12
2 +VCC
11
3 GROUND
10
4 -VCC
9
5 -INPUT
8
6 NO CONNECTION
7
1
+VHV
+VSC
OUTPUT
CASE/GROUND
-VSC
-VHV
Rev. B 8/00