MSK5251 Datasheet, PDF (1/5 Pages) M.S. Kennedy Corporation – HIGH CURRENT, VERY LOW OUTPUT SURFACE MOUNT VOLTAGE REGULATORS

MIL-PRF-38534 CERTIFIED
M.S.KENNEDY CORP.
5251 HIGH CURRENT, VERY LOW OUTPUT
SURFACE MOUNT
VOLTAGE REGULATORS
SERIES
4707 Dey Road Liverpool, N.Y. 13088
[phone]
FEATURES:
Ultra-Fast Transient Response
Very Low Output Voltage
Available in 0.8V, 0.9V, 1.0V, 1.2V, 1.3V and 1.5V
On Board Thermal Shut Down
Reverse Battery and Load Dump Protection
1% Maximum Guaranteed Accuracy
Output Current to 5 Amps
Alternate Output Voltages Available
Ultra-Low Package Height - 0.110" Max.
Contact MSK for MIL-PRF-38534 Qualification Status
DESCRIPTION:
The MSK 5251 series voltage regulators offer high current and low output voltage capability ideal for use with low
voltage microprocessors. Low output impedance, very fast transient response and minimal output capacitance require-
ments make the MSK 5251 an excellent choice for ASIC and FPGA core voltage supplies. The device is available in +0.8V,
+0.9V, +1.0V, +1.2V, +1.3V and +1.5V output configurations with output accuracy guaranteed to 1% maximum. The
MSK 5251 series is packaged in a low profile 3 pin hermetically sealed power surface mount ceramic package.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
PLD/FPGA Core Power Supply
ASIC Core Voltage Regulator
System Power Supplies
Switching Power Supply Post Regulators
Battery Powered Equipment
PIN-OUT INFORMATION
1 VIN
2 VOUT
3 Ground
1
Rev. D 2/07