MSK5250-15 Datasheet, PDF (1/5 Pages) M.S. Kennedy Corporation – Hermetic Surface Mount Package

MIL-PRF-38534 CERTIFIED FACILITY
5250 VERY HIGH CURRENT, LOW DROPOUT
SURFACE MOUNT
M.S.KENNEDY CORP.
VOLTAGE REGULATORS
SERIES
4707 Dey Road Liverpool, N.Y. 13088
[phone]
FEATURES:
Hermetic Surface Mount Package
Extremely Low Dropout Voltage: 370mV @ 5 Amps
Available in 1.5V, 1.7V, 1.9V, 2.5V, 3.3V, 5.0V and 12.0V
On Board Thermal Shut Down
Reverse Battery and Load Dump Protection
Low Ground Current: 70mA Typical at Full Load
1% Maximum Guaranteed Accuracy
Output Current to 5 Amps
Alternate Output Voltages Available
DESCRIPTION:
The MSK 5250 series voltage regulators are available in +1.5V, +1.7V, +1.9V, +2.5V, +3.3V, +5.0V, and
+12.0V output configurations. All boast ultra low dropout specifications due to the utilization of a super PNP output
pass transistor with monolithic technology. Dropout voltages of 370mV at 5 amps are typical in this configuration,
which drives efficiency up and power dissipation down. Accuracy is guaranteed with a 1% maximum output voltage
tolerance. The MSK 5250 series is packaged in a space efficient 3 pin power surface mount ceramic package.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
High Efficiency, High Current Linear Regulators
Constant Voltage/Current Regulators
System Power Supplies
Switching Power Supply Post Regulators
Battery Powered Equipment
1
PIN-OUT INFORMATION
1 VIN
2 VOUT
3 Ground
LID=ISOLATED
8548-44 Rev. G 4/12