MSK5232-19 Datasheet, PDF (1/6 Pages) M.S. Kennedy Corporation – Hermetic Surface Mount Package Option

MIL-PRF-38534 CERTIFIED FACILITY
HIGH CURRENT, LOW DROPOUT
SURFACE MOUNT
M.S.KENNEDY CORP.
VOLTAGE REGULATORS
4707 Dey Road Liverpool, N.Y. 13088
FEATURES:
Hermetic Surface Mount Package Option
Extremely Low Dropout Voltage: 350mV @ 3 Amps
Available in 1.5V, 1.7V, 1.8V, 1.9V, 2.5V, 3.3V, 5.0V and 12.0V
On Board Thermal Shut Down
Reverse Battery and Load Dump Protection
Low Ground Current: 32mA Typical at Full Load
1% Maximum Guaranteed Accuracy
Output Current to 3 Amps
Alternate Output Voltages Available
Available in Four Lead Configurations
Available with Top Tab or Tabless Package
5232
SERIES
[phone]
TOP TAB
DESCRIPTION:
NO TAB
The MSK 5232 series voltage regulators are available in +1.5V, +1.7V, +1.8V, +1.9V, +2.5V, +3.3V, +5.0V,
and +12.0V output configurations. All boast ultra low dropout specifications due to the utilization of a super PNP
output pass transistor with monolithic technology. Dropout voltages of 350mV at 3 amps are typical in this configu-
ration, which drives efficiency up and power dissipation down. Accuracy is guaranteed with a 1% maximum output
voltage tolerance. The case of the MSK5232 series is electrically isolated for heat sinking purposes. The MSK5232
series is packaged in a space efficient 3 pin power package that is available lead formed for surface mount
applications. The device is also available in a power package with a top tab to accomodate direct mounting to a heat
sink.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
High Efficiency, High Current Linear Regulators
Constant Voltage/Current Regulators
System Power Supplies
Switching Power Supply Post Regulators
Battery Powered Equipment
1
PIN-OUT INFORMATION
1 GND
2 VOUT
3 VIN
CASE=ISOLATED
8548-41 Rev. G 4/12