MSK5116-15_15 Datasheet, PDF (1/5 Pages) M.S. Kennedy Corporation – Electrically Isolated Top Tab or Z Tab SIP

MIL-PRF-38534 CERTIFIED FACILITY
M.S.KENNEDY CORP.
HIGH CURRENT,
LOW DROPOUT
VOLTAGE REGULATORS
4707 Dey Road Liverpool, N.Y. 13088
FEATURES:
Electrically Isolated Top Tab or Z Tab SIP
Extremely Low Dropout Voltage: 350mV @ 1.5 Amps
Available in +1.5V,+1.7V,+1.9V,+2.5V,+3.3V,+5.0V and +12.0V
TTL Level Enable Pin: Zero Current Shutdown Mode
Reverse Battery and Load Dump Protection
Low Ground Current: 32mA Typical at Full Load
1% Maximum Guaranteed Accuracy
Output Current to 1.5 Amps
5116
SERIES
[phone]
DESCRIPTION:
The MSK 5116 series voltage regulators are available in +1.5V,+1.7V,+1.9V,+2.5V,+3.3V,+5.0V and +12.0V
configurations. All boast ultra low dropout specifications due to the utilization of a super PNP output pass transistor with
monolithic technology. Dropout voltages of 350mV at 1.5 amps are typical in this configuration, which drives
efficiency up and power dissipation down. Accuracy is guaranteed with a 1% maximum output voltage tolerance.
The series also offers a TTL/CMOS compatible on/off enable function. The MSK 5116 series is packaged in a space
efficient 5 pin power SIP available in two styles with three lead bend options.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
High Efficiency, High Current Linear Regulators
Constant Voltage/Current Regulators
System Power Supplies
Switching Power Supply Post Regulators
Battery Powered Equipment
1
PIN-OUT INFORMATION
1 Enable
2 Vin
3 Ground
4 Vout
5 NC
CASE=ISOLATED
8548-51 Rev. B 4/12