MSK5101-00_15 Datasheet, PDF (1/5 Pages) M.S. Kennedy Corporation – Extremely Compact 10 Pin Flatpack With Metal Base

MIL-PRF-38534 AND 38535 CERTIFIED FACILITY
M.S.KENNEDY CORP.
HIGH CURRENT,
LOW DROPOUT
VOLTAGE REGULATOR
5101
4707 Dey Road Liverpool, N.Y. 13088
FEATURES:
Extremely Compact 10 Pin Flatpack With Metal Base
Extremely Low Dropout Voltage: 350mV @ 1.5 Amps
Available in Adjustable Version only
TTL Level Enable Pin: Zero Current Shutdown Mode
Reverse Battery and Load Dump Protection
Low Ground Current: 22mA Typical at Full Load
1% Guaranteed Accuracy
Output Current to 1.5 Amps
DESCRIPTION:
[phone]
The MSK 5101 voltage regulator is available in the adjustable output configuration only. The ultra low dropout specifica-
tion is due to the utilization of a super PNP output pass transistor with monolithic technology. Dropout voltages of 350mV
at 1.5 amps are typical in this configuration, which drives efficiency up and power dissipation down. The device also offers
a TTL/CMOS compatible on/off enable function. The MSK 5101 is packaged in a space efficient 10 pin ceramic flatpack
with a built in metal base.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
High Efficiency, High Current Linear Regulators
Constant Voltage/Current Regulators
System Power Supplies
Switching Power Supply Post Regulators
Battery Powered Equipment
PIN-OUT INFORMATION
MSK5101-00
1 NC
2 Enable
3 Vin A
4 Vin B
5 NC
6 Vout A
7 Vout B
8 NC
9 Adj
10 NC
BASE
The base of the package is electrically
connected to ground.
1
8548-43 Rev. J 2/13