MSK5021 Datasheet, PDF (1/6 Pages) M.S. Kennedy Corporation – HIGH CURRENT, SUPER LOW DROPOUT ADJUSTABLE VOLTAGE REGULATOR

ISO-9001 CERTIFIED BY DSCC
HIGH CURRENT,
SUPER LOW DROPOUT
5021
ADJUSTABLE VOLTAGE REGULATOR
M.S.KENNEDY CORP.
4707 Dey Road Liverpool, N.Y. 13088
[phone]
FEATURES:
Extremely Low Dropout Voltage: 0.50V @ 20 Amps
Output Voltage Adjustable from 1.3V to 36V with Two External Resistors
TTL Level Enable Pin
Externally Programmable Current Limit
Low Quiescent Current
Available Fully Qualified to Mil-PRF-38534
Output Current to 20 Amps
Regulation Dropout Fault Pin
MIL-PRF-38534 CERTIFIED
DESCRIPTION:
The MSK 5021 is a user adjustable voltage regulator capable of delivering 20 amps to a load with only a 0.5 volt
dropout voltage rating. The output voltage is adjustable from 1.3 volts to 36 volts through the selection of two
external resistors. Low dropout voltage ratings are achieved by employing a unique parallel MOSFET output pass
transistor configuration which drives power dissipation down and efficiency up. Accuracy is guaranteed with a ±1%
voltage tolerance at room temperature that only varies ±2% over temperature. A TTL level input can be used to
enable/disable the device and a regulation dropout Fault pin provides a means of monitoring the output level. The
MSK 5021 is packaged in a thermally efficient 12 pin power dip that can be bolted directly to a heat sink.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
High Efficiency, High Current Linear Regulators
Adjustable Voltage/Current Regulators
System Power Supplies
Switching Power Supply Post Regulators
1
PIN-OUT INFORMATION
1 Enable
2 VAdjust
3 Ground
4 CPump
5 Input
6 Fault
12 Output
11 Output
10 Sense
9 VSC
8 VSC
7 Case Connection
Rev. F 1/05