MSK496RH_15 Datasheet, PDF (1/7 Pages) M.S. Kennedy Corporation – Low Dose Rate Hardened to 50 Krad(Si) (Method 1019.7 Condition D)

MIL-PRF-38534 & 38535 CERTIFIED FACILITY
M.S.KENNEDY CORP.
496RH RAD HARD QUAD PRECISION
RAIL TO RAIL
CURRENT SENSE AMP
FEATURES:
Manufactured using
RH6105 Dice
Radiation Hardened to 100 Krad(Si) (Method 1019.7 Condition A)
Low Dose Rate Hardened to 50 Krad(Si) (Method 1019.7 Condition D)
Neutron Tested to 5X10¹¹ n/cm² (Method 1017.2)
Very Wide Input Common Mode Range
Extends 44V Above V- (Independent of V+)
Extends -0.3V Below V-
Wide Power Supply Range: 2.85V to 36V
Input Offset Voltage: 400μV Maximum
Gain Accuracy: 1% Max
Gain Configurable with External Resistors
Operating Current: 195μA typ. per Amp
Slew Rate: 2V/μs
Sense Input Current When Powered Down: <1μA
Full-Scale Output Current: 1mA Minimum
Non-Rad Hard EDU's Available
DESCRIPTION:
The MSK496RH is a radiation hardened quad precision micropower current sense amplifier with a very wide input common
mode range. With Over-the-Top^® Technology, the MSK496RH is capable of sensing in high side or low side applications.This
combined with external gain setting, and common mode and power supply rejection in excess of 100dB, make the MSK496RH
well suited for a variety of current sensing applications. The MSK496RH is hermetically sealed in a 16 pin flat pack, and is available
with straight or gull wing lead form.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
High Side or Low Side Current Sensing
Current Monitoring on Positive or Negative Supply Voltages
Battery Monitoring
Fuse/MOSFET Monitoring
Power Management
1
PIN-OUT INFORMATION
1 VOUT 1
2 +IN 1
3 -IN 1
4 V-
5 VOUT 2
6 CASE
7 +IN 2
8 -IN 2
16 -IN 4
15 +IN 4
14 CASE
13 VOUT 4
12 V+
11 -IN 3
10 +IN 3
9 VOUT 3
8548-89 Rev. I 10/14