MSK4310HU Datasheet, PDF (1/8 Pages) M.S. Kennedy Corporation – 10 AMP, 55V, 3 PHASE BRUSHLESS MOTOR SPEED CONTROLLER

ISO 9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
10 AMP, 55V, 3 PHASE
BRUSHLESS MOTOR
SPEED CONTROLLER
4310
4707 Dey Road Liverpool, N.Y. 13088
[phone]
FEATURES:
55 Volt Motor Supply Voltage
10 Amp Output Switch Capability
Shoot-Through/Cross Conduction Protection
Hall Sensing and Commutation Circuitry on Board
User Programable Current Limit
Tach Out-Closed Loop Control
Available With 3 Lead Configurations
MIL-PRF-38534 CERTIFIED
DESCRIPTION:
The MSK 4310 is a complete 3 Phase Brushless Motor Speed Controller in an electrically isolated hermetic
package. The hybrid is capable of 10 amps of output current and 55 volts of DC bus voltage. Included is all of the
bridge drive circuitry, hall sensing circuitry and commutation circuitry. Also included is a user programable current
limit circuit and a tachometer circuit for closed loop operation. The MSK 4310 has good thermal conductivity of the
output switches due to isolated substrate/package design that allows direct heat sinking of the hybrid without
insulators.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Fan/Blower Speed Control
Azimuth/Elevation Antenna Control
Optical Tracking Control
Robot Velocity Control
PIN-OUT INFORMATION
1 +15V INPUT
2 -15V INPUT
3 TACH OUT
4 REF OUT
5 TACH RC
6 HALL A
7 HALL B
8 HALL C
9 SPEED - COMMAND
10 SPEED + COMMAND
1
20 V+
19 CØ
18 BØ
17 AØ
16 GND
15 BRAKE
14 E/A OUT
13 -E/A
12 CURRENT LIMIT ADJUST
11 SIGNAL GND
Rev. B 2/04