MSK2541 Datasheet, PDF (1/6 Pages) M.S. Kennedy Corporation – DUAL HIGH POWER OP-AMP

ISO 9001 CERTIFIED BY DSCC
M.S. KENNEDY CORP
DUAL HIGH POWER
OP-AMP
2541
4707 Dey Road Liverpool, N.Y. 13088
[phone]
FEATURES:
Available as SMD #5962-9083801 HX
High Output Current - 10 Amps Peak
Wide Power Supply Range - ±10V to ±40V
On Board Current Limit
FET Input
Isolated Case
Second Source for OMA 2541SKB
MIL-PRF-38534 CERTIFIED
DESCRIPTION:
The MSK 2541 is a high power dual monolithic amplifier ideally suited for high power amplification and magnetic
deflection applications. This amplifier is capable of operation at a supply voltage rating of 80 volts and can deliver
guaranteed continuous output currents up to 5A per amplifier. The MSK 2541 has internal current limit circuitry to
protect the amplifier and load from transients. The MSK 2541 is available in a hermetically sealed 8 pin TO3 package
that is isolated from internal circuitry. This allows for convenient bolt down heat sinking when necessary.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Servo Amplifer
Motor Driver
Audio Amplifier
Programmable Power Supply
Bridge Amplifier
PIN-OUT INFORMATION
1 Output B
2 Positive Power Supply
3 Non-Inverting Input A
4 Inverting Input A
8 Inverting Input B
7 Non-Inverting Input B
6 Negative Power Supply
5 Output A
1
Rev. B 8/00