MSK198RHL_15 Datasheet, PDF (1/7 Pages) M.S. Kennedy Corporation – Total Dose Tested to 100 Krads(Si) (Method 1019.7 Condition A)

MIL-PRF-38534 AND 38535 CERTIFIED FACILITY
RAD HARD
DUAL PRECISION
OP-AMP
198RHL
FEATURES:
Manufactured using
Space Qualified RH1498 Die
MIL-PRF-38534 Class K Processing & Screening
Total Dose Tested to 100 Krads(Si) (Method 1019.7 Condition A)
Rail - to - Rail Input and Output
800µV Max Vos from V+ to V-
Gain - Bandwidth Prduct: 10MHz
Slew Rate: 6V/uS Typical
Low Supply Current per Amplifier: 1.7mA
Stable for Capacitive Loads Up to 10,000pF
Large Output Drive Current: 30mA
Wide Supply Range: 4.5V to ±15V
Contact MSK for MIL-PRF-38534 Qualification and Radiation Status
DESCRIPTION:
The MSK198RHL is a radiation hardened dual operational amplifier for use in space and severe military applications. This
device offers rail-to-rail input and output, 10MHz gain-bandwidth product and 6V/uS slew rate. With a wide supply range of
4.5V to ±15V and drive current to 30mA, these op amps remain stable while driving capacitve loads up to 10,000pF. The
MSK198RHL is an ideal solution when multiple robust precision amplifiers are required and board space is at a premium.
The hermetically sealed MSK198RHL is offered in a leadless ceramic chip carrier package for surface mount applications.
PIN-OUT INFORMATION
1 OUT A
2 NC
3 -IN A
4 NC
5 +IN A
6 NC
7 V-
8 CASE/LID
9 +IN B
10 NC
11 -IN B
12 NC
13 OUT B
14 NC
15 V+
16 NC
CASE; LID = PIN 8
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Battery Powered Precision Instrumentation
Driving A - to - D Converters
Rail - to - Rail Buffer Amplifiers
Low Voltage Signal Processing
Active Filters
1
8548-33 Rev. A 1/15