MSK181_15 Datasheet, PDF (1/8 Pages) M.S. Kennedy Corporation – Low Quiescent Current: 20 mA Typ.

MIL-PRF-38534 AND 38535 CERTIFIED FACILITY
HIGH VOLTAGE/HIGH CURRENT
M.S.KENNEDY CORP.
OPERATIONAL AMPLIFIER
181
FEATURES:
Available to DSCC SMD 5962-92152
Low Cost
High Voltage Operation:
Single Supply: +8V to +60V
Dual Supply: ±4V to±30V
High Output Current: 3 Amp Continuous
High Speed: 10V/μS
Low Quiescent Current: 20 mA Typ.
Adjustable Current Limits
Thermal Shutdown
Monolithic Technology
Enable/Status Pin For Output Disable Control
MSK181
MSK181Z
DESCRIPTION:
The MSK181 is a high power monolithic operational amplifier ideal for use with a wide variety of loads. With operation from either
single or dual supplies, the MSK181 offers excellent design flexibility. Power dissipation is kept to a minimum with a quiescent
current rating of only 20mA, while 3 Amps of continuous available output current makes the MSK181 a very good low cost choice
for motor drive circuits and audio amplification. The MSK181 is internally protected against current overloads and overtemperature
conditions. Current limit can also be user-selected through the use of a resistor/potentiometer or voltage out/current out DAC. The
MSK181 is packaged in a hermetically sealed 8 pin power dip and the MSK181Z is offered with bolt down tabs for applications that
require heat sinking.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Servo Driver
Actuator Driver
Audio Amplifier
Power Supplies
PIN-OUT INFORMATION
1 +VIN
2 -VIN
3 ILIM
4 E/S
1
8 -VCC
7 +VCC
6 OUTPUT
5 N/C
8548-1 Rev. M 8/14