MSK1461_15 Datasheet, PDF (1/6 Pages) M.S. Kennedy Corporation – Large Gain-Bandwidth Product

MIL-PRF-38534 AND 38535 CERTIFIED FACILITY
M.S.KENNEDY CORP.
1461 HIGH SPEED/VOLTAGE
OP AMP
FEATURES:
Extremely Fast - 500v/μS
Wide Supply Range ±15V to ±45V
VMOS Output, No Secondary Breakdown
Large Gain-Bandwidth Product
FET Input
Electrically Isolated Case
800mA Typical Output Current
Available as SMD #5962-90500
DESCRIPTION:
The MSK1461 is a state of the art high speed FET input operational amplifier. The distinguishing characteristic of the
MSK1461 is its unique VMOS output stage which completely eliminates the safe operating area restrictions associated
with secondary breakdown of bipolar transistor output stage op-amps. Freedom from secondary breakdown allows the
MSK1461 to handle large output currents at any voltage level limited only by transistor junction temperature. 115 dB of
open loop gain gives the MSK1461 high closed loop gain accuracy and the typical ±1.0mV of input offset voltage will fit
well in any error budget. A 500 V/μS slew rate and 1200 MHz gain bandwidth product make the MSK1461 an outstanding
high-speed op-amp. A single external capacitor is used for compensation and output current limiting is user programmable
through the selection of two external resistors.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Video Yoke Drivers
Video Distribution Amplifiers
High Accuracy Audio Amplification
High Speed ATE Pin Drivers
PIN-OUT INFORMATION
1 Inverting Input
2 Non-Inverting Input
3 No Connection
4 No Connection
5 Negative Power Supply
6 Negative Current Limit
7 No Connection
1
14 Offset Adjust
13 Offset Adjust
12 Compensation
11 Compensation
10 Positive Power Supply
9 Positive Current Limit
8 Output
8548-137 Rev. E 10/14