MSK0002RH Datasheet, PDF (1/7 Pages) M.S. Kennedy Corporation – RAD TOLERANT, HIGH SPEED, BUFFER AMPLIFIER

MIL-PRF-38534 CERTIFIED
M.S.KENNEDY CORP.
RAD TOLERANT,
0002RH ^{HIGH SPEED,}
BUFFER AMPLIFIER
4707 Dey Road Liverpool, N.Y. 13088
[phone]
FEATURES:
Total Dose Tested to 300 Krads (Si)
RAD Tolerant LH0002 Replacement
High Input Impedance-180KΩ Min
Low Output Impedance-10Ω Max
Low Harmonic Distortion
DC to 30 MHz Bandwidth
Slew Rate is Typically 400 V/µS
Operating Range from±5V to ±20V
Contact MSK for MIL-PRF-38534 Qualification Status and Appendix G (Radiation Status)
DESCRIPTION:
The MSK 0002RH is a general purpose current amplifier. It is the industry wide RAD tolerant replacement for the
LH0002. The device is ideal for use with an operational amplifier in a closed loop configuration to increase current
output. The MSK 0002RH is designed with a symmetrical output stage that provides low output impedances to both
the positive and negative portions of output pulses. The MSK 0002RH is packaged in a hermetic 8 lead low profile
T0-5 header and is specified over the full military temperature range.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
High Speed D/A Conversion
30MHz Buffer
Line Driver
Precision Current Source
PIN-OUT INFORMATION
1 V1+ 5 E4
2 V2+ 6 V2-
3 E3
7 V1-
4 Output 8 Input
1
Rev. A 4/07