MSK-0041 Datasheet, PDF (1/7 Pages) M.S. Kennedy Corporation – HIGH POWER OP-AMP

M.S KENNEDY CORP.
ISO 9001 CERTIFIED BY DSCC
0041 ^{MHEIDGIHUMPOPWOEWR ER}
OOPP--AAMMPP
SERIES
4707 Dey Road Liverpool, N.Y. 13088
[phone]
MIL-PRF-38534 QUALIFIED
FEATURES:
Available as SMD #5962-8508701
Output Current - 0.5 Amps Peak
Low Power Consumption-Class C Design
Programmable Current Limit
High Slew Rate
Continuous Output Short Circuit Duration
Replacement for LH0041
Available in a surface mount package
DESCRIPTION:
MSK0041FP
MSK0041
The MSK 0041 and 0041FP are general purpose Class C power operational amplifiers. These amplifiers offer high
output currents, making them an excellent low cost choice for motor drive circuits. The amplifier and load can be pro-
tected from fault conditions through the use of internal current limit circuitry that can be user programmed with two
external resistors. These devices are also compensated with a single external capacitor. The MSK 0041 is available in a
hermetically sealed 12 pin TO-8 package. The MSK 0041FP is packaged in a 12 pin hermetic metal flatpack.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
Servo Amplifer
Motor Driver
Audio Amplifier
Programmable Power Supply
(PIN NUMBERS ARE FOR TO-8)
1
PIN-OUT INFORMATION
MSK0041
MSK0041 FP
1 ISC+
2 Compensation
3 GND
4 NC
5 -Input
6 +Input
7 Balance
8 Balance
9 ISC-
10 -VCC
11 Output
12 +VCC
1 GND
2 Balance
3 -Input
4 +Input
5 Balance
6 NC
7 -VCC
8 ISC-
9 Output
10 ISC+
11 +VCC
12 Compensation
Rev. - 4/02