|
OA2000 Datasheet, PDF (3/4 Pages) MRV Communications, Inc. – Optical Access 2000 (OA2000) | |||
|
◁ |
Network Management
The OA2000switch supports the SNMP protocol and the Telnet interface
delivers comprehensive in-band management.The system can be managed
and monitored using the SNMP/RMON protocol through computers
equipped with network management software or via an Internet web
browser. LED indicators are located on the front panel to assist network
administrators in troubleshooting. A Port Mirroring feature provides a non-
intrusive mechanism for traffic inspection across the entire switch.
Remote Maintenance
The MRV OA2000 switch Series sets the standard for Network Management
and Maintenance capabilities:
⢠Loop testing is executed in-service, with no maintenance personnel.
Loop test frames are sent remotely, providing port status reports
directly to the maintenance console.
⢠Power failure alarms distinguish between cable faults and local
power failures.
⢠The MRV OA2000 switch Series uses MegaVision Network
Management System, which can provide Fault, Performance, and
Configuration Management, in one package.
L2 Features
⢠Up to 8K MAC address entries
⢠4M-bit for packet buffer size
⢠Provides flow control mechanism: backpressure for half duplex;
IEEE802.3x for full duplex operation
⢠Store-and-forward forwarding scheme
⢠HOL (Head of Line) blocking prevention
⢠Port mirroring
⢠Provides Link Aggregation
⢠Up to 8 ports in one trunk
⢠Up to 4 trunk groups
⢠Trunks across switches
⢠Supports 802.3ad (LACP)
⢠Cisco Ether-channel (static truck)
⢠Load Balance for both Unicast and Multicast traffics
⢠Supports VLAN
⢠IEEE 802.1Q tagging VLAN
⢠Port-based VLAN
⢠Up to 255 active VLANs
⢠GVRP protocol for automatic VLAN registration and dynamic VLAN
management
⢠Private VLAN
⢠IGMP (v1/v2) Snooping and Query function
⢠Broadcast Storm control
⢠IEEE 802.1D Spanning Tree protocol
⢠IEEE 802.1w Rapid Spanning Tree
⢠IEEE802.1s Multiple Spanning Tree*
Security
⢠RADIUS (Authentication)
⢠Access Control List
⢠Port based MAC filtering
⢠Supports IEEE 802.1x port based security Management
⢠Username, password security control for telnet and web
management
Management
⢠Supports SNMP v1/v2c management functions
⢠Supports RMON (groups 1,2,3 and 9)
⢠Supports Web-based management
⢠Supports TELNET console interface
⢠Supports BOOTP and DHCP for IP address assignment
⢠Supports firmware upgraded by TFTP file transfer protocol through
the Ethernet network
⢠Supports Firmware image upgrade by TFTP protocol
⢠Supports dual Firmware images
⢠Supports Configuration file upload/download by TFTP protocol
⢠Supports two or more Configuration files
⢠SNMP access IP filtering configuration
⢠Provides 1 Male DB9 RS-232C console interface configured as DTE for
operation, diagnostics, status, and configuration information
⢠Provides Command Line Interface from the console port using a VT-
100 terminal
⢠Supports SNTP
⢠Event / Error Log
⢠Port mirroring
⢠MegaVision â MRV Network management system support
Quality of Service
⢠L2/L3/L4Traffic Classification/Priority Management
⢠CoS by IEEE 802.1p 4 priority queues control
⢠Traffic Classification/Priority Management based on IP Precedence/
TOS & DSCP
⢠Traffic Classification/Priority Management based on TCP/UDP port
number
⢠Supports WRR for priority queues
⢠Strict scheduling for priority queue
⢠Rate Limiting (Ingress & Egress based)
⢠Supports Random Early Detection (RED)
Physical Ports
⢠24 Single Fiber (WDM Bidirectional) 100Base-FX ports with SC
connectors
⢠2 Gigabit Combo (RJ-45/SFP) Uplink ports
⢠Out-Of-Band Management: 1 RJ45 Auto-MDIX 10/100Mbps Ethernet
Port 1 DB-9 RS232 Consol port
Optical Interface
⢠Connector : Single Fiber with SC Connector
⢠Cable : 9/125µm SM Fiber (ITU-T G.652)
⢠Standard : 100BASE â FX
⢠Wave Length : Up stream â 1.3 m Down stream - 1.5 µm
⢠Transmitting Power Range : -8 ~ -14 dBm
⢠Receiving Power Range : -8 ~ -30 dBm
Mechanical
⢠Dimensions: 440mm x 324mm x 43mm (17.37â x 12.76â x 1.7â)
⢠LED indicators: Port, Uplink, System, Diagnostic.
Performance
⢠Switch Fabric: 8.8 Gbps
⢠MAC address: 8K
Power Requirements
⢠Nominal AC Input Voltages: 110-240V
⢠DC Input Voltage: 12V
⢠Line Input Frequency: 47-63 Hz
⢠Maximum Power Consumption: 35W
Safety
⢠CSA/NRTL (UL1950, CSA 22.2.9.50)
⢠TUV/GS (EN60950)
Electromagnetic Compatibility
⢠CE Mark
⢠FCC Class A
⢠VCCI Class A
⢠CISPR Class A
Environmental
⢠Temperature:
⢠IEC 68-2-14
⢠0 to 50 degrees C (Standard Operating)
⢠-40 to 70 degree C (Non-operating)
⢠Humidity: 10% to 90% (Non-condensing)
⢠Vibration: IEC 68-2-36, IEC 68-2-6
⢠Shock: IEC 68-2-29
|
▷ |