OCC-A-320-N Datasheet, PDF (2/3 Pages) MRV Communications, Inc. – OCC - Optical Cross Connect

Datasheet
•-More tests performed with less equipment and
personnel
•-Decreased capital expenditures by sharing
expensive equipment
•-Minimal test set up, retests, and testing errors
•-Accelerated product time to market
The center of OCC architecture is a three dimensional
Micro-Electro-Mechanical (3D-MEMS) switching
matrix. This technology allows transparent switching
of single-mode fiber connections in less than 20 ms
with a typical insertion loss of 2.0 dB, and it makes
the OCC ideal for maintaining optical attributes
when testing:
•-High density 10 Gbps applications
•-40 Gbps protocols
•-Non-standard protocols
•-WDM applications with parallel wavelength
switching
•-Burst mode signals as in PON applications
The OCC is scalable to 640 optical terminations or
320 bi-directional ports per system. Ports are added
in increments of 8 using the 8-Port Driver card.
The system includes test ports used to share test
equipment within the system. Optionally, the OCC is
available with a multi-channel power monitor (MCPM)
that monitors the optical input power and adjusts for
minimum optical signal loss.
Administration, configuration, and mappings are
easily performed using the web-based management
graphical user interface (GUI) or an industry-
standard TL-1 interface that easily integrates into
scripting scenarios. These interfaces are accessible
either through the RS-232 serial local console port or
through the RJ-45 Ethernet port using SSH or telnet
protocol.
Physical Specifications
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
Input Voltage
Input Current
In-rush Current
Power Dissipation
Physical Dimensions
Weight
Shipping Weight
Regulatory Compliances
Reliability
Serviceability
Indicators
-5°C to 50°C (23°F to 122°F)
-40°C to 70°C (-40°F to 158°F)
5% to 90%, non-condensing
5% to 95%, non-condensing
-42V to -57V DC
4A continuous, max.
7A for 8 ms
470 mW per connection (fully-loaded chassis)
752 mm high x 445 mm wide x 318 mm deep (29.6”H x 17.5”W x 12.5”D)
40 kg (88 lbs)
75 kg (165 lbs)
UL 60950, EN 60950-1, CSA 69950; FCC Part 15 (Class A), GR-1089-CORE, EN 55022 (Class
A), EN 55024;
GR-63-CORE, EN 300019; CFR Title 21 Part 1040 Class 1; ANSI T1.315-2001
MTBF > 12 years
Hot-swappable field-replaceable units (FRU)
Standard telco alarms
2