EMPMC-36SFP3RMR Datasheet, PDF (2/3 Pages) MRV Communications, Inc. – Media Cross Connect Blades

Datasheet
SFP/SFP+/XFP Interface Blade Options
SFP Blade (EMPMC-36SFP) has 36 protocol-independent ports
supporting protocols with data rates up to 3.0 Gbps including
Ethernet, Fast Ethernet, Gigabit Ethernet, SONET (OC-3, OC-12,
OC-48), and Fibre Channel (1 and 2 Gigabit), SDI, and HD-SDI.
Multi-Rate CDR SFP Blade (EMPMC-36SFP3RMR) has 36 protocol
independent ports. The CDR Multi-Rate SFP blade includes all
the functions of the FC SFP blade with the addition of the 3R
function for SONET OC-3, OC-12, OC-48, and 10/100/1000Base
Ethernet. The CDR function is activated independently on each
port to eliminate accumulated jitter associated with higher data
rate or multiple-hop applications.
8G SFP+ Blade (EMPMC-36FC8G) for use in the 8X chassis (NC316-
144PMC8X) has 36 SFP+ protocol-independent ports. The blade is
equipped with CDR for Fibre Channel 8 Gbps and can also support
2R 10/100/1000 Ethernet and any 2R protocol up to 3.0 Gbps.
10G SFP+ Blade (EMPMC-3610GMR) for use in the high speed
chassis only (NC316-144HS) has 36 SFP+ protocol-independent
ports that are backward compatible with legacy SFPs. This blade
supports Ethernet up to 10G, SONET (OC-3, OC-12, OC-48 and
OC-192), and Fibre Channel (1, 2, and 4 Gbps) SDI, and HD-SDI.
10G XFP Blade (EMPMC-9XFP) has 9 XFP ports supporting either
10-Gig Ethernet LAN (IEEE P802.3ae) or 10-Gig Fibre Channel.
All ports perform 3R signal retiming. The 10 Gig XFP blade
can be equipped with a copper XFP providing support for 10G
applications using a copper interface.
Copper Interface Blade Options
RJ-45-C Blade (EMPMC-36RJ-C) provides 36 independent
10/100/1000Base-TX Ethernet ports with 3R signal retiming.
Each port supports auto-negotiation, speed, duplex, link match,
MDI/MDI-X auto-sensing, and jumbo Ethernet packets. It fully
supports 100 Mbps and 1000 Mbps copper-to-fiber media
conversion and uni-directional traffic.
T1/E1 Blade (EMPMC-36T1E1) provide RJ-48c ports that can be
independently configured for T1 or E1 mode and for 3R signal
regeneration. For media conversion applications, the 36T1E1
ports can also be mapped to SFPs supporting 100 Mbps Ethernet.
It also provides MDI-MDIX software switching.
DS3/E3/STS-1 Blade (EMPMC-18DT3E3) provides 18 DS3/E3/
STS-1 ports with coaxial (1.0/2.3) connectors. Each port may be
independently configured to operate in DS3, E3, or STS-1 mode.
Cable adapters from (1.0/2.3) to BNC are available.
6G SAS/SATA Blade (EMPMC-36SAS) SAS/SATA blade for use in the
NC316-144PMC8X chassis supports 3.0 and 6.0 Gbps data rates using
nine standard mini-SAS 4x connectors with full transparency to any
end devices. The blade provides input signal detection, and it can
disable signal transmissions to simulate cable breaks or link flapping.
2
SFP Blade (36 ports)
Multi-Rate CDR SFP Blade (36 ports)
8G SFP+ Blade (36 ports)
10G SFP+ Blade (36 ports)
10G XFP Blade (9 ports)
RJ-45-C Blade (36 ports)
T1/E1 Blade (36 ports)
DS3/E3/STS-1 Blade (18 ports)
6G SAS/SATA Blade (36 ports)