TM2-XFPF Datasheet, PDF (1/2 Pages) MRV Communications, Inc. – LambdaDriver®–10GE XFP - Dual Transponder Module with FEC (TM2-XFPF)

WDM & Optical Transport
Datasheet
LambdaDriver^®–10GE XFP - Dual Transponder Module with FEC (TM2-XFPF)
Features
10GE LAN/WAN data rate
3R support
G.709 performance monitoring
Line and Diagnostics Loop-back tests
XFP digital diagnostics
Link Integrity Notification (LIN)
Hot swappable
TM2-XFPF
Applications
10 GE signal regeneration and optical wavelength
conversion
DWDM networks with end-to-end performance
monitoring
Data rate upgrade of existing CWDM/DWDM networks
Extended optical spans at 10 Gbps performance
Overview
The TM2-XFPF is a single slot module incorporating two
independent 10GE XFP transponders, that convert the “gray”
wavelength of a terminal equipment interface to ITU-T grid
DWDM wavelength enabling its transport via the LambdaDriver^®
Optical Transport System.
For 10GE traffic performance parameters are defined by RFC2819
(RMON).
Line and Diagnostic Loop-back functionality is supported and
provides an essential tool for troubleshooting and maintenance
operations in a live network.
A key feature of each of the channels is the support of the G.709
FEC protocol as well as the Enhanced FEC (EFEC), with superior
error correction performance.
The FEC functionality significantly extends the overall distance
reach of a 10GE rate link while keeping the expected industry
standard BER performance.
The FEC/EFEC mode is user selectable via the system management card.
Performance monitoring is supported for both access and trunk
ports, providing the relevant conditions and alarms at each
receive side.
Statistics for current 15 minutes interval and up to 32 previous
intervals can be viewed.
The Diagnostics loop-back function checks the integrity of the
internal ports circuitry while the Line loop-back is used to check
the fiber connections integrity. The Line loop-back and the
Diagnostics loop-back are available for both the Access (Client)
and trunk ports.
This module is supported by all LambdaDriver chassis with an
MNGP model management card.
The Link Integrity Notification (LIN) function allows the terminal
equipment to detect the link failure in the path between the two
terminal equipment units regardless of the location of the failure.
TM2-XFPF
Redundant Link Transponder
TM2-XFPF
Dual Transponder
Not sure what solution best fits your needs? Visit www.mrv.com or e-mail us at [e-mail]