OPN1600-8C2 Datasheet, PDF (1/2 Pages) MRV Communications, Inc. – LambdaDriver Ethernet Switching Module (OPN800/1600-8C2)

WDM & Optical Transport
Datasheet
LambdaDriver^® – Ethernet Switching Module (OPN800/1600-8C2)
OPN1600-8C2
Overview
The LambdaDriver^® OPN800/1600-8C2, the first Optical Packet
blade, combines packet switching with optical transport for
carriers migrating to transport optical packet networks (OPN).
The MRV’s LambdaDriver^® Optical Packet Transport solution is
the industry first OPN solution to support both ROADM (OOO)
and Optical Electronic Optical (OEO) crossconnect functionalities
in the same solution, integrated with unique service enabling
that ranges from T1 up to 40G in the same wavelength switching
chassis platform. The solution supports simultaneously TDM
transport as well Metro-Ethernet-connection-oriented packet
and traffic management and enables carriers smooth migration
from SONET/SDH towards Metro Ethernet Optical Transport
networks.
The LambdaDriver^® OPN800/1600-8C2 enables end-to-end
optical & packet transport with sub 50ms recovery time, and
its high availability allows for the highest reliability required to
support carrier transport services.
To provide enhanced OAM and end-to-end Packet Optical service
management capabilities, the LambdaDriver OPN800/1600-
8C2 solution incorporates unique integration of MPLS packets
Features
Redundancy protection with 50 ms recovery time
H-QoS according to MEF 14 Traffic Management conformance
Ethernet Service OAM to guarantee SLAs
Multi-purpose customer & network interfaces at lower TCO
IPv6 future proof (hardware incorporated)
10Gbps LAN/WAN XFP ports
Applications
Micro-PoP Services
Business Ethernet Services
Intra-provider and Inter-provider WAN
Provider bridging or MPLS L2 VPN
and GMPLS Optical transport control plan with carrier Ethernet
802.3AG and ITU-T Y.1731 matching the best Packet and DWDM
capabilities.
Architecture
The OPN800/1600-8C2 module incorporates 8 x 10/100/1000
Ethernet ports equipped with RJ-45 connectors and 2 x 10Gbps
XFP based ports.
In addition, a 10/100 Ethernet port is provided on the front panel
for out-of-band / local management.
Global and per-port Link and Activity status-indicator LEDs are
provided.
Management
The Ethernet 10/100Base-TX interface is directly connected to
the CPU and is not affected by in-band traffic. As an IP interface,
it is used only for connecting a management LAN. Management
stations on the LAN can be used to manage the OPN1600-8C2
module out-of-band (using a TELNET, SSH, or SNMP connection
over Ethernet). Additionally, a TFTP client can be connected to the
out-of-band interface to access configuration files stored in the
OPN800/1600-8C2 module.
������
�������� ���������� � �� ���� ��� ������� ���� ������
���� ����������� ����������
� ����� ����������������� �����
�� ������ � ��� �����
�����������
Not sure what solution best fits your needs? Visit www.mrv.com or e-mail us at [e-mail]