MRV-FD-DWDMMUX Datasheet, PDF (1/3 Pages) MRV Communications, Inc. – Passive DWDM Components

Datasheet
Optical Communications Systems™
Passive DWDM Components
EM316DWMUX16
EM316DWMUX32
Highlights
Passive MUX/DeMUX - 8, 16, or 32 channels
Passive Optical Add/Drop (OADM) - 1, 2, 4 or 8 channels
DWDM C-Band, 100GHz ITU Grid (0.8nm spacing)
Transparent operation - protocol and topology independent
Secure physical separation between data channels
Low insertion loss
Power required only for managed applications and LEDs
High port density
Overview
The Fiber Driver DWDM Passive MUX/DeMUX and OADM modules deliver the benefits of a Dense Wave Division Multiplexer in a fully
passive solution. With matching MUX/DeMUX units placed at each end of an optical link, up to 32 data channels can be combined
and transmitted over a single-mode fiber trunk. The passive OADM modules can add or drop up to 8 data channels at any point
along the trunk.
Because they operate independent of protocol and topology, these passive components remain transparent to both the network
and the end user. With plug-n-play setup and a design that minimizes budget loss, they can readily and seamlessly integrate into an
existing environment. Their small form factor and no power requirement means they can be placed virtually anywhere.
Contact your MRV Communications representative for additional information on Fiber Driver or any MRV product, including pricing
and availability.
Physical Specifications
Operating Temperature
Storage Temperature
Relative Humidity
Storage Humidity
Physical Dimensions: One-Slot Module
Two-Slot Module
Approximate Weight: One-Slot Module
Two-Slot Module
Regulatory Compliance
-5°C to 50°C (23°F to 122°F)
-55°C to 85°C (-67°F to 185°F)
85% maximum, non-condensing
5% to 95%, non-condensing
25 mm x 90 mm x 170 mm deep (1” x 3.56” x 6.67” deep)
50 mm x 90 mm x 170 mm deep (2” x 3.56” x 6.67” deep)
0.8 kg (1.8 lb)
1.4 kg (3.1 lb)
FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity;
RoHS Directive; China RoHS; WEEE Directive
* If operated in a non-powered chassis, temp range is -5º C to 70º C (23º F to 158º F)
1