LD1600P Datasheet, PDF (1/2 Pages) MRV Communications, Inc. – LambdaDriver® 1600 Chassis

Datasheet
LambdaDriver® 1600 Chassis – High Density, High Power CWDM/DWDM Platform (LD1600 P/L)
LD1600
Features
Flexible and scalable modular architecture
Metro, Regional and Long Haul applications
Hot Swappable –modules and Power Supplies
CWDM and DWDM in one system
Industry standard AC and DC Power Supplies
Redundant and Load Sharing Power scheme
Comprehensive PS status report
Installed modules shut down/restart via management card
Extensive management and Service monitoring support.
Inventory and HW/SW version report of installed modules.
Overview
LD1600L
The LambdaDriver® Optical Transport System is a CWDM/DWDM Optical networking platform providing multifunctional modular
solution for Metro, regional and Medium/Long haul data centric networks.
The Lambda Driver system is capable of carrying all types of services at rates ranging from 8 Mbps up to 10Gbps.
The modular architecture and compact size of the system provides unmatched configuration flexibility and scalability.Topologies
such as Point-to-Point, Linear add-drop, Ring and Star are easily implemented.
Several schemes of redundancy such as Y-cabling, 1+1 trunk backup are supported at the service access level and at the trunk
level.
All the supported modules are Hot-swappable enabling non-disrupting maintenance and service of the system.
Extensive management capability completes the LambdaDriver® OpticalTransport System’s definition as a high endWDM platform.
Remote in-band access is available through any SNMP-enabled Network Management System (NMS). MRV Communications’ own
MegaVision Pro NMS provides a complete GUI and End-to-End Service Monitoring feature for all LambdaDriver® products.
The LD1600L and LD1600P are 19-inch rack mountable with modular architecture hosting different types of modules such as
Transponders, Mux/DeMux or OADM modules and being capable of supporting up to 160 DWDM wavelengths.
All modules are hot-swappable and slot independent (except the management modules which reside in pre-defined slots).
The LD1600L and LD1600P chassis support redundant and hot-swappable industry standard AC wide range and DC power
supplies.
Up to 4 Powers Supplies (EM800P-PS/DC or EM800P-PS/AC) can be installed in a chassis to provide a “n+1” scheme redundancy
with controlled load sharing. AC and DC power supplies can be mixed on the same chassis.
LD1600P is 11.5U high with 2 reserved slots for 2 management cards (main + redundant), 16“short”size general slots and 6“long”
size general slots for Transponders, OADMs, Mux, OA, etc.
4 front loaded Hot-Swappable Power Supplies provide high resiliency and 3+1 redundancy mode.
LD1600L is 11.5U high with 2 reserved slots for 2 management cards (main + redundant), 8 “short” size general slots and 10 “long”
size general slots for Transponders, OADMs, Mux, OA, etc.
4 front loaded Hot-Swappable Power Supplies provide high resiliency and 3+1 redundancy mode.
Typical LambdaDriver Modules
- 8, 16 and 40 channels CWDM/DWDM Multiplexers and Demultiplexers
- 1 to 8 channels CWDM/DWDM OADM (Optical Add/Drop Multiplexer)
- ROADM – 2 degree & multi-degree
- Optical Amplifiers – EDFA and RAMAN
- Transponders – SFP/XFP interface at the Access ports and Trunk ports.
- TDM Sub-rate Muxponders – FE, GE, ESCON, FC, OCx/STMx
- Protection (1+1) and OSC –Optical Service Channel
(**) For more details see the product specific datasheets
Not sure what solution best fits your needs? Visit www.mrv.com or e-mail us at [e-mail]