EM316GSW-XY Datasheet, PDF (1/5 Pages) MRV Communications, Inc. – EM316GSW-XY

Datasheet
EM316GSW-XY
Gigabit/Fast Ethernet Multifunction Converter/Repeater/
Transponder/Multi-Media Switch
Overview
Fiber grooming (media conversion and optimization) incorporates
a wide variety of data transmission functions traditionally
implemented through multiple independent solutions. The MRV
XY multifunction media converters combine media conversion,
distance extension, and fiber optimization into versatile multi-
function modules. The EM316GSW-XY, is an extremely versatile
transponder/converter for the Fiber Driver Optical Multi-Service
Platform.
The EM316GSW-XY combines two Gigabit copper ports and two
modular SFP Gigabit Ethernet ports to serve several traditional
roles with virtually any network media.
-¹----Dual Copper-to-Fiber Converter – Fast/Gigabit Ethernet
-²----Self-Healing Converter - redundant trunk and access links
-³----Fiber and Copper Repeaters – multi-mode or single-mode
fiber support
-⁴----Mixed-Media Switch - media conversion with collision isolation
Figure 1: Modes of operation
Highlights
Hundreds of functions in one module including:
1.-Dual 10/100/1000Base-T, Ethernet copper-to-
fiber (100Base-FX or 1000Base-X) converter
2.-Self-healing 10/100/1000Base-T, Ethernet copper-
to-fiber (100Base-FX or 1000Base-X) converter
3.-Dual repeater - fiber-to-fiber (100Base-
FX or 1000Base-X) and copper-to-copper
(10/100/1000Base-T)
4.-Mixed-media Ethernet switch – two copper
(10/100/1000Base-T) and two fiber (100Base-FX or
1000Base-X) interfaces
Copper 10/100/1000Base-T ports with auto-
negotiation and automatic MDI/MDIX sensing
Speed-matching conversion between all ports
Manual configuration for speed, duplex, auto-
negotiation, MDI/MDIX, and loopback
Jumbo packet support (9600B)
Link fault pass-through (most modes)
- Link Integrity Notification (LIN) – MRV protocol
“Layer 1” ring redundancy for fault tolerance based
on MRV Ethernet Automatic Protection Switching
(MAPS)
VLAN support
Loopback testing
IEEE 802.3u compliance
SFP support for Fast Ethernet, Gigabit Ethernet,
and multirate transceivers
Hot-swap support - modules can be removed and
replaced without impacting other modules in the
chassis
Optical performance monitoring through SFP
Digital Diagnostics (SFF-8472)
Advanced SNMP management
Compatibility with all powered Fiber Driver
chassis
Converter 1
Converter 2
Access
RJ-45
Redundant
Fiber Optic
Repeater
Copper
Repeater
Fiber Optic
Copper 1
Fiber Optic 1
Fiber Optic 2
Copper 2
1 _{DUAL COPPER-TO-FIBER}
CONVERTER
2 _{SELF-HEALING CONVERTER}
3 FIBER AND COPPER
REPEATERS
4 _{MIXED-MEDIA SWITCH}
1