EM316DMR10G-3R Datasheet, PDF (1/3 Pages) MRV Communications, Inc. – SFP+ Multi-Rate Dual Transponder

Datasheet
SFP+ Multi-Rate Dual Transponder
EM316DMR10G-3R
Overview
The Fiber Driver® 10-Gigabit Multi-Rate Dual Transponder
(EM316DMR10G) from MRV extends deployment options and
streamlines inventory management. It combines software-
selectable data rates, connectivity mapping between any ports,
and advanced Small Form-factor Pluggable (SFP+) optical
transceivers supporting the latest high-speed protocols. The
wide range of optical infrastructure solutions includes media-
conversion, signal repeating, lambda conversion, Wave Division
Multiplexing (WDM), and Optical Add/Drop Multiplexing
(OADM). The EM316DMR10G supports redundancy for self-
healing links in mission-critical applications. It also provides
physical layer multicasting and broadcasting over any
supported protocol.
Installing the EM316DMR10G-3R in any powered Fiber Driver
chassis is quick and easy. Insert the module into the chassis,
then insert the selected port transceivers and set the ports to
the application data rate. To change the connection type later,
simply replace the SFP+ transceiver and change the data rate.
SFP+ transceivers can be reused easily at different locations or for
other applications. Reuse maximizes the investment in optical
equipment, and it reduces the need for on-hand inventory.
The EM316DMR10G module performs full 3R signal regeneration
(retransmission, reshaping, and retiming) on each channel at
any selected data rate and protocol. The module is configurable
through the Fiber Driver management interfaces: SNMP, Telnet,
SSH, or the local serial port. Most data rates may also be set by
jumpers located on the module itself for unmanaged operation.
Highlights
Wide range of applications
--Media conversion
--Signal repeating
--Lambda conversion
--WDM
--OADM
--Self-healing redundant links
--Physical layer multicasting
Any-port-to-any-port connectivity
Single-port-to-multi-port connectivity
3R signal regeneration
--Retransmission
--Reshaping
--Retiming
Wide data rate support
--Gigabit Ethernet
--1/2/4/8 Gbps Fibre Channel
--Any 10G protocol (up to 11.3 Gbps)
- 10G Ethernet LAN or WAN PHY
- 10G Fibre Channel
- 10G SONET/SDH
- G.709 FEC rates up to 11.3 Gbps
Pseudo Random Bit Sequence (PRBS) sender/
checker for connection testing
SFP+ transceivers for flexible configuration
High port density - four data ports per slot
SNMP management through MegaVision Pro® and
a Fiber Driver network management module
SFP+ Digital Diagnostics
Compatible with all Fiber Driver chassis
Benefits
Flexible and scalable
--Add or change optics to adjust data or media rates
--Maintain single item inventory
Wide range of optical and copper interfaces
--Standard wavelengths (850 nm, 1310 nm, 1550 nm)
--CWDM wavelengths
--DWDM (ITU-T G.694.1-2002)
Gigabit through 10G Ethernet, Fibre Channel, and WAN
1