EM316DCM060 Datasheet, PDF (1/2 Pages) MRV Communications, Inc. – Chromatic Dispersion Compensation Modules

Datasheet
Chromatic Dispersion Compensation Modules
Overview
The EM316DCM060 and EM316DCM100 Dispersion Compensation
Modules are part of the Fiber Driver® DWDM solution. They are
two-slot modules accommodated by either the Fiber Driver two-
slot or sixteen-slot chassis. These modules may be operated as
passive units in an un-powered chassis or as managed modules
with an EM316LNXNM-OT Network Manager (NM) in a powered
chassis system.
DCM modules provide fixed chromatic dispersion compensation
for high-speed metro core, regional, and extended-haul DWDM
networks. Chromatic dispersion is a major distance limiting factor
in DWDM networks for protocols exceeding 2 Gbps including 2
and 4 Gbps Fibre Channel, 2.5 and 2.7 Gbps SONET/SDH OC-48/
STM16 with or without FEC, and especially networks running 10
Gbps.
The DCMs offer a high dispersion compensation level and a very
low insertion loss penalty. They provide negative dispersion
compensation over the full C-Band with possible distance
extensions of up to 100 kilometers.
Features
Dispersion compensation in high-speed extended-
haul DWDM networks
In-line dispersion compensation at network mid-points
Post-dispersion and pre-dispersion compensation
Two-slot Fiber Driver module fits 2-slot and 16-slot
Fiber Driver chassis
Powered or passive operation
Full C-Band coverage
Low insertion loss under 3.5 dB
Chromatic dispersion compensation up to 100 km
Slope-matched SMF28/G.652 fiber
Increased OSNR and system margins
Economic solution ideal for single stage amplification
Cascading support
.#"5 !#
.#"5 !#
.#"5 !#
$7$-
-58
"//34%2
KM
%-%$&! "2
). ,).%
KM
02% !-0
$7$-
$-58
%-%$&! ,02
%-%$&! ,02
1
).054
/54054
072.-3