EM2009-8AXFP Datasheet, PDF (1/2 Pages) MRV Communications, Inc. – LambdaDriver® Multi-protocol OTN Muxponder Modules

Datasheet
LambdaDriver® Multi-protocol OTN Muxponder Modules
(EM2009-8AXFP/8AXFP2/TM-8A8T)
Features
OTU2 line interfaces (FEC or EFEC)
Multi-service / multi-protocol transport
Extensive performance management capability
Diagnostics Loop-Back (DLEB)
Digital Diagnostics monitoring
Hot swappable
Choice of XFP or tunable long haul line interface
LIN Support
Applications
Advanced Multiprotocol Service aggregation
Services ADD/DROP over single wavelenght
EM2009-8AXFP/8AXFP2/TM-8A8T
Overview
The OTN Muxponders are a revolutionary addition to the
LambdaDriver system that enhance the versatility and
flexibility of WDM-based network design and implementation
to unprecedented levels.
These modules are Multi-Service line cards that incorporate
8 SFP-based access ports and one or two line ports (XFP or
tunable DWDM) and are two shorts slot wide.
The uniqueness of this device consists in its capability to accept
any protocol at its access ports in different mixing schemes and
aggregate these services over an OTU2 line with FEC or EFEC
support.
The access services can be any mix of the protocols STM1/4/16,
OTU1, FC100/200/400, FE/GE, SDI /HD-SDI and 3G-SDI protocols.
TM-8A8T).
The EM2009-8AXFP2 incorporates two XFP based line interfaces
thus having the capability of forwarding some the services
received at one line port to local client ports while forwarding
other services to a next hop via a second line port, there by
functioning as a non-optical service add/drop multiplexer and
thus eliminating the need to use a dedicated wavelength for
each service.
Extensive performance monitoring is supported on all ports as
required by most of the carrier-oriented management systems.
Diagnostics LoopBack per port can be remotely activated with
the management module to facilitate troubleshooting and
network maintenance.
Each access port can host any standard SFP (Copper, Coax or
Fiber).
Modules with XFP line ports (e.g.,EM2009-8AXFP) are best
suited for Access/Metro Networks, while the long-haul
applications are addressed by modules with a tunable DWDM
transceiver with superior optical transport performance (e.g.,
A typical application is aggregation of multiple services over
single fiber or single wavelength with high-level Performance
Monitoring.
The modules are manageable with the LambdaDriver
management module (EM800-MNGP or EM1600-MNGP) either
locally over a serial RS-232 connection or remotely over a
Telnet or SNMP connection using, for example with the MRV
Server
Server
WDM
Storage
1GE
Fibre Channel
ODU 1
SDI
STM-16
Video
OTU 2
Fibre Channel
ODU 1
SDI
Storage
1GE
Server
Video
STM-16
1GE
Fibre Channel
ODU 1
SDI
Storage
Video
STM-16
Not sure what solution best suits your needs? Visit www.mrv.com or e-mail us at [e-mail]