EM1600-ROADM40 Datasheet, PDF (1/2 Pages) MRV Communications, Inc. – LambdaDriver 2 Degree ROADM Module (EM1600-ROADM40)

Datasheet
LambdaDriver® 2 Degree ROADM Module (EM1600-ROADM40)
MPO to Mu fiber optics cable
EM1600-ROADM40
Features
40-channel, 100 GHz spacing
Fully reconfigurable optical Add/Express unit
Fully transparent, protocol and bit-rate
independent
Modular concept with integrated add and
drop units
Independently controlled VOAs for
equalization and blocking of all express and
add channels
Integrated per channel optical power
monitoring
Operating wavelength range C-band, L-band
optional, ITU grid
Applications
Fully tunable 40 wavelengths networks
Ring and Linear OADM topologies
Overview
The LambdaDriver® EM1600-ROADM40 module uses an
advanced IPLC technology for Reconfigurable ADD/EXPRESS
and ultra-low loss DWDM DROP functionality, based on
Arrayed Waveguide Grating (AWG) devices. The ROADM can
multiplex/demultiplex up to 40 DWDM C-Band channels
(carrier wavelengths/frequencies) spaced 100 GHz apart over
a single physical fiber. Each channel is fully independent of
the others and can carry data at the same rate as a dedicated
physical fiber.
The range of the channels is between 192.00 THz (1561.419
nm) and 195.90 THz (1530.334 nm).
Any of the following actions can be performed on each channel
independently:
− ADD: Enable the channel to carry data from local access
equipment over the ROADM network.
− DROP: Enable the channel to carry data received from
remote access equipment to local access equipment.
− PASS: Enable the channel to carry data received from remote
access equipment to another LambdaDriver.
− DARK: Block the channel from carrying data from local or
remote access equipment to another LambdaDriver.
The power level of signals on each of the 40 channels can be
monitored and attenuated by any value between 0 and 25 dB.
In addition, the power level of signals in any group of channels
can be equalized to maximize the operating efficiency of
optical amplifiers in the network.
Each EM1600-ROADM40 module occupies two slots (among
slots 19 to 24) in a LambdaDriver chassis.
All ADD/DROP ports use MPO connectors (10 channels per
connector) and all trunk (COM and EXPRESS) ports use LC
connectors.
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
Dimensions (W x H x D)
Weight
Connector
- 5 to 45 ^o C
-10 to 70 ^o C
85% maximum, non-condensing
54.18 mm ( 2.13 in) x 263.4 mm (10.37 in) x 227.5 mm (8.95 in)
2.7kg (5.95 lb)
ADD/DROP-MPO, TRUNK-LC
Not sure what solution best fits your needs? Visit www.mrv.com or e-mail us at [e-mail]