MP2009EE-1.8-LF-P Datasheet, PDF (2/14 Pages) MPS Industries, Inc. – Ultra-Low-Noise Low-Dropout, 120mA Linear Regulator

MP2009-ULTRA LOW NOISE, LOW DROPOUT,120mA LINEAR REGULATOR
ORDERING INFORMATION
Part Number**
MP2009EE-1.5*
MP2009EE-1.8
MP2009EE-2.5
MP2009EE-2.6
MP2009EE-2.7
MP2009EE-2.8
MP2009EE-2.85
MP2009EE-3
MP2009EE-3.3
MP2009EE-4.0
MP2009EE-4.5
Package
VOUT(V)
1.5
1.8
2.5
Top Marking
8B
AQ
Free Air Temperature
Range (T_A)
2.6
2.7
5-SC70
2.8
2.85
-20C to +85C
3
3.3
9U
4.0
CG
4.5
* For Tape & Reel, add suffix –Z (eg. MP2009EE-1.5–Z).
For Lead Free, add suffix –LF (eg. MP2009EE-1.5–LF–Z)
** Available options are identified by those with top marking. For other options, please contact factory to check
availability.
PACKAGE REFERENCE
ABSOLUTE MAXIMUM RATINGS ⁽¹⁾
Supply Input Voltage .................................6.5V
Power Dissipation, P_D @ T_A =25°C ⁽²⁾
5-SC70 .................................................0.385W
Operation Temperature Range ... -20°C to 85°C
Storage Temperature Range ..... -65°C to 150°C
Lead Temperature (Soldering, 10sec) ..... 300°C
Recommended Operating Conditions ⁽³⁾
Supply Input Voltage...................... 2.0V to 6.0V
Enable Input Voltage ........................ 0V to 6.0V
Operating Junction Temp (T_J) . - 40°C to +125°C
Thermal Resistance ⁽⁴⁾ θ_JA θ_JC
5-SC70 ............................ .......260.....130 C/W
Notes:
1) Exceeding these ratings may cause permanent damage to
the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature, TJ(MAX), the junction-to-
ambient thermal resistance, θJA, and the ambient
temperature, TA. The maximum allowable power dissipation at
any ambient temperature is calculated using: PD(MAX)=(TJ(MAX)-
TA)/θJA. Exceeding the maximum allowable power dissipation
will cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage. Thermal
shutdown engages at TJ=150C(typ) and disengages at
TJ=130C (typ).
3) The device is not guaranteed to function outside its operating
conditions.
4) Measured on JESD51-7 4-layer board.
MP2009 Rev. 1.22
www.MonolithicPower.com
2
11/21/2016
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.