MA300GQ-P Datasheet, PDF (13/18 Pages) MPS Industries, Inc. – Angular Sensor for 3-Phase Brushless Motor Commutation and Position Control with Side-Shaft Positioning Capability

MA300
Angular Sensor for 3-Phase Brushless Motor
Commutation and Position Control with Side-Shaft
Positioning Capability
5. Read back register 5:
command reg. address MSB
value
LSB
0001 0101 00000000
The MagAlpha returns:
Angle out
MSB
value
LSB
A(15:12)
A(11:8) 0 0 0 0 1 0 0 0
Complete Flashing:
1. Connect VFLASH to 3.6V.
2. Flash register 4:
command reg. address MSB
value
LSB
0010 1001 00010000
3. Flash register 5:
command reg. address MSB
value
LSB
0010 1001 00100000
4. Disconnect VFLASH from 3.6V.
5. Turn the MagAlpha off and on and read
back registers 4 and 5 to verify that the
flashing was successfully accomplished
(steps 3 & 5 in the “Permanently Storing
the Zero Position” section).
Monolithic Power Systems, Inc. | Gland, Switzerland | Tel: [phone] | [e-mail] | www.sensimatech.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited. © 2014 Monolithic Power Systems. All Rights
Reserved. MA700 Rev 1.0 September 2014
13