PSF8040 Datasheet, PDF (1/1 Pages) MPS Industries, Inc. – MAGNETIC EPOXY SHIELDED SMT POWER INDUCTOR

MAGNETIC EPOXY SHIELDED
SMT POWER INDUCTOR
PSF8040 SERIES
• Magnetic shielding using magnetic epoxy resin results in lower
costs as compared to traditional ferrite shielded inductors
• Size: 8.7mm length x 8.6mm width x 4.0mm height
• Operating Temperature -40ºC to +120ºC
• RoHS Compliant Product
• Custom Design Available
ELECTRICAL PARAMETERS @ 25°C
Part Number
PSF8040-
INDUCTANCE
(μH)
±20%
Isat
(Adc)
MAX
DCR
(Ω)
MAX
100M
10
150M
15
220M
22
330M
33
470M
47
680M
68
101M
100
151M
150
221M
220
331M
330
681M
680
Note:
1. Inductance measured at 100KHz, 1Vrms
2. Isat: ∆L drops 30% max from its initial value
3.20
0.038
2.60
0.058
2.20
0.075
1.80
0.110
1.50
0.160
1.20
0.230
1.00
0.330
0.80
0.490
0.60
0.730
0.50
1.10
0.30
2.20
DIMENSIONS (mm)
Product performance is limited to specified parameters.Data is subject to change without prior notice.
Tel: [phone]
Fax: [phone]
Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X,X : ±0,38 X,XX : ±0,10
www.mpsind.com
[e-mail]