PI25T Datasheet, PDF (1/1 Pages) MPS Industries, Inc. – SMT HIGH CURRENT PLANAR TRANSFORMERS

SMT HIGH CURRENT
PLANAR TRANSFORMERS
PI25 SERIES
• High Thermal Efficiency & Energy Storage
• High Current Rating Up to 73 Amps
• Lower Profile of 7.4 mm Max.
• Wider Flexibility of Inductances
• Footprint 23.50 mm X 19.50 mm
• Operating Temperature -40ºC to +130ºC
• Custom Design Available
Part Number Inductance
PI25-
@ 0 A_DC
(uH±10%)
Inductance
@ I_rated
(uH±15%)
ELECTRICAL PARAMETERS @25°C
I_rated
(A_DC)
DC Resistance
(mΩ MAX)
Primary Secondary
Turns Ratio
Primary Secondary
Isolation
(V_DC)
S1604
2.10
2.00
30.0
2.0
1500
4T
NOTES:
1. Inductance of TI25S1604 measured on Agilient/HP4284 between pins 7 & 11 at 100 KHz, 0.1 Vrms.
2. The I_rated is either 85% of the I_saturation or the I_heating depending which is lower.
3. The I_saturation is the current which causes the inductance to drop by 15% of its nominal value.
4. The I_heating is the current which causes the temperature of the part to increase by approximately 45°C.
16T
1500
I_saturation
(A)
@25ºC @100ºC
I_heating
45
40
37.0
DIMENSIONS (mm)
SCHEMATICS
SUGGESTED PAD LAYOUT
Product performance is limited to specified parameters.Data is subject to change without prior notice.
Tel: [phone]
Fax: [phone]
Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X,X : ±0,38 X,XX : ±0,10
www.mpsind.com
[e-mail]