P6201 Datasheet, PDF (1/1 Pages) MPS Industries, Inc. – RS-485/RS-422 INTERFACE PUSH-PULL TRANSFORMERS

RS-485/RS-422 INTERFACE
PUSH-PULL TRANSFORMERS
P6201 SERIES
• Designed for use with the Maxim™ MAX253, MAX845 and Ana-
log Devices™ ADM2485 or equivalent to provide isolated RS-485,
RS-232, and RS-422 interfaces.
• High isolation voltage of 2.5KVrms
• Small Size: 15.00mm x 10.40mm x 6.50mm
• Operating Temperature: -40°C to +85°C
• RoHS Compliant Product
• Custom Design Available
Part Number
P6201-
Inductance
(1-4)
(µH Typ)
21
500
83
500
43
500
34
500
11
500
13
500
38
500
122
250
23
500
NOTES:
•
Primary: Connect 1-2 and 3-4 in series
•
Secondary: Connect 8-7and 6-5 in series
•
OCL, L_L, Cww measured at 100KHz, 0.1Vrms
•
Hipot: 2500Vrms, 1mA, 2S, Primary to Secondary
ELECTRICAL PARAMETERS @25°C
Turns Ratio
(1-4 : 8-5)
(±5%)
ET (1-4)
V-µSec
(MAX)
DCR
(1-4)
(Ω MAX)
2CT : 1 CT
18
1.50
2.67CT : 1CT
18
1.50
1.33CT : 1CT
11
1.00
1CT : 1.33CT
11
1.00
1CT : 1CT
11
1.00
1CT : 2CT
11
1.00
1CT : 2.67CT
11
1.00
1CT : 2.2CT
11
1.00
1CT : 1.5CT
18
1.00
DIMENSIONS
L_L
(1-4)
(µH MAX)
1.50
2.00
1.20
1.20
1.00
1.20
2.00
1.00
1.00
Cww
(1-4 to 8-5)
(pF MAX)
50
50
50
50
50
50
50
50
50
SCHEMATIC
Product performance is limited to specified parameters.Data is subject to change without prior notice.
Tel: [phone]
Fax: [phone]
Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X,X : ±0,38 X,XX : ±0,10
www.mpsind.com
[e-mail]