N5110 Datasheet, PDF (1/2 Pages) MPS Industries, Inc. – RJ-45 10/100 BASE-TX Jack with Magnetic Module

RJ-45 10/100 BASE-TX Jack
with Magnetic Module
N51XX Series
• Single port shielded RJ-45 connector with 10/100 Magnetics
• Operating temperature: 0°C to 70°C
• Storage temperature: -40°C to 85°C
• Available for all 10/100 transceiver Phy chips
• Complies with IEEE standards and all 10/100 Ethernet
specifications including 350μH with 8mA DC Bias
• 1500Vrms Isolation
ELECTRICAL SPECIFICATION @ 25°C
Part Number Insertion Loss
(dB max.)
Return Loss
(dB min.)
Common to Common
Mode Rejection
(dB min.)
Common to Diferential
Mode Rejection
(dB min.)
0.3-100
1-30
MHz
MHz
30-60
MHz
60-80
MHz
0.1-100
MHz
N5110
-1
-18 18-20Log(f/30MHz) -12
-35
N5120
-1
-18 18-20Log(f/30MHz) -12
-35
N5130
-1
-18 18-20Log(f/30MHz) -12
-35
• Note: 1) Contact: 30 micro inch selective gold plating
4)Operating Life: 750 cycles min.
2) Plastic Housing: Glass filled polyester UL94V-0
5) PCB retention pre-solder: 1 Lb min.
3) Pins: Phosphor bronze t=0.35mm
6) PCB retention post- solder: 10 Lbs min.
• Other versions available with alternate pin-out configurations. Contact MPS Engineering Team.
0.1-100
MHz
-40
-40
-40
Crosstalk
(dB min.)
0.5-100
MHz
-35
-35
-35
Mechanical
0.75
[19.05]
0.62
[15.75]
0.85
[21.59]
Ø0.035
[Ø0.89]
Pin 1
0.050
[1.27]
0.025
[0.63]
0.100
[2.54]
0.100
[2.54]
Pin 1
0.53
[13.59]
0.60
[15.19]
0.01
[0.25]
8
0.100
[2.54]
0.425
[10.79]
0.18
[4.57]
0.050
[1.27]
0.250
[6.35]
Ø0.062
[Ø1.57]
0.450
[11.43]
0.120
[3.05]
0.61
[15.49]
Suggested Pad Layout
Ø0.128
[Ø3.25]
Dimensions
Unless otherwise specified, all tolerances are:
.XX ± 0.010” & .XXX ± 0.003”
Inches
[mm]
N3XXXS-A
0443TA
1
Product performance is limited to specified parameter. Data is subject to change without prior notice.
2463 208th, Ste. 205
Phone: [phone]
http://www.mpsind.com
Torrance, CA 90501
Fax: [phone]
Email: [e-mail]