MPM3684GRU-Z Datasheet, PDF (1/19 Pages) MPS Industries, Inc. – 18V 15A Step-Down Power Module in 12x15x4mm QFN

MPM3684
18V 15A Step-Down Power Module
in 12x15x4mm QFN
DESCRIPTION
The MPM3684 is an easy-to-use fully integrated
15A step-down DC/DC power module. It
integrates the DC/DC converter, power inductor,
input/output capacitors and the necessary
resistors/capacitors in a compact QFN
12mmX15mmX4mm package. This total power
solution needs as few as two external
components (one resistor and one capacitor) to
work. MPM3684 can deliver 15A output current
over a wide input supply voltage range with
excellent load and line regulation.
The MPM3684 uses Constant-On-Time (COT)
control to provide fast transient response and
ease the loop stabilization.
The default under voltage lockout threshold is
internally set around 4.1V, but a resistor
network on the enable pin can increase this
threshold. The MPM3684 has an internal LDO
to power the control circuits and the integrated
power devices. This LDO can be disabled by an
external 5V to boost the efficiency.
The MPM3684 has an internal about 3ms soft
start (SS) timer. It can be increased with an
extra SS capacitor. An open drain power good
signal indicates that the output voltage is within
nominal voltage range.
The MPM3684 has fully integrated protection
features that include over-current protection,
over-voltage protection and thermal shutdown.
FEATURES
 Complete 15A DC-to-DC Solution
 Wide Input Voltage Range from 2.5V:
-- 2.5V to 18V with External 5V Bias
-- 4.5V to 18V with Internal Bias
 1% Reference Voltage Over 0˚C to 70˚C
Junction Temperature Range
 Adaptive COT Control for Ultrafast
Transient Response
 Programmable Switching Frequency from
200kHz to 1MHz
 Support Pre-Bias Start Up
 Programmable Soft-Start Time with Default
3ms
 Non-latch OCP, OVP and Thermal
Shutdown
 Output Adjustable from 0.65V to 5V
 QFN-65 (12mmx15mmx4mm) Package
APPLICATIONS
 Telecom and Networking Systems
 Base Stations
 Servers
 Personal Video Recorders
 Flat Panel Television and Monitors
 Distributed Power Systems
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
MPM3684 Rev. 1.02
www.MonolithicPower.com
1
11/30/2016
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.