MP20041DGT-GB-LF-Z Datasheet, PDF (1/11 Pages) MPS Industries, Inc. – Dual, Ultra Low Noise, High PSRR 300mA Linear Regulator

INTERNAL USE ONLY / DO NOT DISTRIBUTE
MP20041
Dual, Ultra Low Noise, High PSRR
300mA Linear Regulator
DESCRIPTION
The MP20041 is a dual-channel, micropower,
ultra low noise, low dropout and high PSRR
linear regulator. The output voltage of MP20041
ranges from 1.2V to 3.6V in 100mV increments
and 1% accuracy by operating from a +2.5V to
+6.0V input. The MP20041 can supply up to
300mA of load current at each channel.
The MP20041 uses an internal PMOS as the
pass element, which consumes 114μA supply
current (both LDOs on) at no load condition.
The EN1 and EN2 pins control each output
respectively. When both channels shutdown
simultaneously, the chip will be turned off and
consume nearly zero operation current which is
suitable for battery-power devices. The
MP20041 features current limit and over
temperature protection.
It is available in a 2mm x 2mm TQFN8 package.
FEATURES
 Wide Operating Voltage Ranges: 2.5V to 6V
 Two LDOs in a 2mmx2mm TQFN8 Package
 Up to 300mA Output Current (Per Channel)
 Dual Enable Pins Control Each Output
 72dB PSRR at 10kHz
 11μVRMS Ultra Low Noise Output with No
Noise Bypass Capacitor Required
 73mV Dropout at 100mA Load
 Very Fast Line/Load Transient Responses
with Small Input/Output Capacitor
 Current Limit and Thermal Protection
APPLICATIONS
 Cellular Phones
 Battery-powered Equipment
 Laptop, Notebook, and Palmtop Computers
 Hand-held Equipment
 Wireless LAN
All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For
MPS green status, please visit MPS website under Quality Assurance. “MPS”
and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
MP20041 Rev. 1.01
www.MonolithicPower.com
1
4/21/2017
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.