LQH43PN1R0N26 Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)

Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
Data Sheet
1
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH43P_26 Series (1812 Size)
c Dimensions
3.6±0.2
3.2±0.2
c Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
Minimum Quantity
500
2500
4.5±0.3
3.2±0.2
1.0min. 1.0min. 1.0min.
(in mm)
c Rated Value (p: packaging code)
Part Number
Inductance
Rated Current
Rated Current
(Based on Inductance Change) (Based on Temperature Rise)
LQH43PN1R0N26p
1.0µH ±30%
3400mA
LQH43PN2R2M26p 2.2µH ±20%
2300mA
LQH43PN3R3M26p 3.3µH ±20%
1800mA
LQH43PN4R7M26p 4.7µH ±20%
1400mA
LQH43PN6R8M26p 6.8µH ±20%
1200mA
LQH43PN8R2M26p 8.2µH ±20%
1100mA
LQH43PN100M26p
10µH ±20%
1050mA
LQH43PN220M26p
22µH ±20%
700mA
LQH43PN470M26p
47µH ±20%
470mA
LQH43PN101M26p 100µH ±20%
320mA
LQH43PN151M26p 150µH ±20%
280mA
LQH43PN221M26p 220µH ±20%
220mA
Test Frequency: 1MHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is not included): -40 to +85°C
3300mA
2500mA
2100mA
1600mA
1400mA
1300mA
1170mA
780mA
520mA
320mA
260mA
240mA
DC Resistance
0.026ohm ±20%
0.042ohm ±20%
0.052ohm ±20%
0.075ohm ±20%
0.098ohm ±20%
0.128ohm ±20%
0.147ohm ±20%
0.327ohm ±20%
0.718ohm ±20%
1.538ohm ±20%
2.362ohm ±20%
2.900ohm ±20%
Self Resonance
Frequency (min.)
100MHz
45MHz
40MHz
35MHz
30MHz
25MHz
20MHz
15MHz
8MHz
4MHz
3MHz
2MHz
c Notice (Rated Current)
When Rated Current is applied to the Products,
Inductance will be within ±30% of nominal
Inductance value.
When Rated Current is applied to the Products,
self-generation of heat will rise to 40°C or less.
Continued on the following page.
oThis data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.9.8
http://www.murata.com/