HF01B04DS-LF Datasheet, PDF (1/16 Pages) MPS Industries, Inc. – Off Line High Voltage Quasi Resonant Regulator

HF01B00/01/02/03/04
Off Line High Voltage
Quasi Resonant Regulator
DESCRIPTION
The HF01B00/01/02/03/04 is a flyback regulator
with Green Mode Operation. Its high efficiency
feature over the entire input/load range meets
the stringent world-wide energy-saving
requirements.
The HF01B00/01/02/03/04 is an integrated
current mode controller with a 700V FET. Its
valley switching detector ensures minimum
Drain-Source voltage switching every cycle, per
Quasi-resonant operation. When the output
power falls below a given level, the regulator
enters the burst mode to lower the stand-by
power consumption.
An internal minimum off time limiter prevents
the switching frequency from exceeding 150
kHz, which is below the CISPR-22 EMI start
limit. Internal 2.4ms soft start prevents the
excessive inrush current during start up
The HF01B00/01/02/03/04 provides various
protections, such as Thermal Shutdown (TSD),
V_CC Under Voltage Lockout (UVLO), Over Load
Protection (OLP), Over Voltage Protection
(OVP) and so on.
The HF01B00/01/02/03 is available in PDIP8-7B
package. And HF01B04 is available in PDIP8-7B
and SOIC8-7B packages.
Maximum Output Power⁴
P/N
230Vac±15%³ 85Vac~265Vac
Adapter¹
Open
Frame²
Adapter¹
Open
Frame²
HF01B00DP 35W 54W 23W 30W
HF01B01DP 29W 45W 18W 23W
HF01B02DP 24W 33W 14W 17W
HF01B03DP 22W 30W 11W 13W
HF01B04DP 19W 23W 8W
HF01B04DS 19W 23W 8W
11W
11W
Notes:
1. Maximum continuous power in a non-ventilated enclosed
adapter measured at 50℃ ambient temperature.
2. Maximum continuous power in an open frame design at 50℃
ambient temperature.
3. 230Vac or 110/115Vac with doubler.
4. The junction temperature can limit the maximum output power.
FEATURES
 Internal Integrated 700V MOSFET
 High Level of Integration, Requires Very
Few External Components
 Universal Input Voltage (85~265VAC)
 Quasi-Resonant Operation over the Entire
Input and Load Range
 Maximum Switching Frequency Limited
 Valley Switching for High Efficiency and
Better EMI Performance
 Active Burst Mode for Low Standby Power
Consumption
 Internal High-Voltage Current Source for
Start-Up
 Internal Soft Start
 Internal 320ns Leading Edge Blanking
 Thermal Shutdown (Auto Restart with
Hysteresis)
 V_CC Under Voltage Lockout with Hysteresis
(UVLO)
 Over Voltage Protection
 Over Load Protection.
 No Load Consumption at 265Vac
HF01B00<100mW
HF01B01<80mW
HF01B02/03<50mW
HF01B04<30mW
APPLICATIONS
 Battery charger for consumer and home
equipment.
 Standby power supply.
 Small power SMPS for white goods and
consumer electronics.
 Low/Medium power AC/DC adapter.
For MPS green status, please visit MPS website under Quality Assurance.
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
HF01B00/01/02/03/04 Rev. 1.2
www.MonolithicPower.com
1
4/9/2013
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.