EV2359DJ-00B Datasheet, PDF (4/4 Pages) Monolithic Power Systems – 1.2A, 24V, 1.4MHz Step-Down Converter Evaluation Board in TSOT23-6

EV2359DJ-00B – 1.2A, 24V, 1MHz STEP-DOWN CONVERTER in TSOT23-6 EV BOARD
QUICK START GUIDE
1. Connect the positive terminal of the load to VOUT pin, and the negative terminal of the load to
GND pin.
2. Preset the power supply output to 4.5V – 24V and turn off the power supply.
3. Connect the positive terminal of the power supply output to the VIN pin and the negative
terminal of the power supply output to the GND pin.
4. Turn the power supply on. The board will automatically startup.
5. To use the Enable function, apply a digital input to EN pin. Drive EN higher than 1.2V to turn on
the regulator, drive EN less than 0.4V to turn it off.
NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications.
Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS
products into any application. MPS will not assume any legal responsibility for any said applications.
EV2359DJ-00B Rev. 1.0
www.MonolithicPower.com
4
5/5/2006
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2006 MPS. All Rights Reserved.