English
Language : 

MP28115 Datasheet, PDF (2/11 Pages) Monolithic Power Systems – 4A, 1.5MHz Synchronous Step-Down Converter
MP28115 – 4A, 1.5MHz SYNCHRONOUS STEP-DOWN CONVERTER
PACKAGE REFERENCE
TOP VIEW
FB 1
GND 2
SW 3
IN 4
BS 5
EXPOSED PAD
ON BACKSIDE
10 EN/SYNC
9 GND
8 SW
7 IN
6 POK
Part Number*
MP28115DQ
Package
QFN10
(3mm x 3mm)
Temperature
–40°C to +85°C
* For Tape & Reel, add suffix –Z (e.g. MP28115DQ–Z)
For RoHS Compliant Packaging, add suffix –LF
(e.g. MP28115DQ–LF–Z)
ABSOLUTE MAXIMUM RATINGS (1)
IN to GND ....................................-0.3V to +6.5V
SW to GND ........................... -0.3V to VIN + 0.3V
SW to GND ............ -2.5V to VIN+2.5V for <50nS
FB, EN/SYNC, POK to GND...........-0.3V to +6.5V
BS to SW .....................................-0.3V to +6.5V
Junction Temperature...............................150°C
Lead Temperature ....................................260°C
Storage Temperature ...............-65°C to +150°C
Recommended Operating Conditions (2)
Supply Voltage VIN............................. 2.7V to 6V
Output Voltage VOUT ................. 0.8V to 0.9 x VIN
Operating Temperature ..............-40°C to +85°C
Thermal Resistance (3) θJA θJC
QFN10 (3mm x 3mm) ............. 50 ...... 12... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The device is not guaranteed to function outside of its
operating conditions.
3) Measured on approximately 1” square of 1 oz copper.
ELECTRICAL CHARACTERISTICS (4)
VIN = VEN = 3.6V, TA = +25°C, unless otherwise noted.
Parameters
Condition
Supply Current
Shutdown Current
IN Undervoltage Lockout
Threshold
VEN = VIN
VFB = 0.85V
VEN = 0V, VIN = 6V
Rising Edge
IN Undervoltage Lockout
Hysteresis
Regulated FB Voltage
FB Input Current
EN High Threshold
EN Low Threshold
Internal Soft-Start Time
TA = +25°C
–40°C ≤ TA ≤ +85°C
VFB = 0.85V
–40°C ≤ TA ≤ +85°C
–40°C ≤ TA ≤ +85°C
High-Side Switch On-Resistance
Low-Side Switch On-Resistance
SW Leakage Current
ISW = 300mA
ISW = –300mA
VEN = 0V; VIN = 6V
VSW = 0V or 6V
BS Under Voltage Lockout
Threshold
Min Typ Max Units
750
μA
1
μA
2.59 2.69
V
210
mV
0.788 0.800 0.812 V
0.780 0.800 0.820 V
±50
nA
1.6
V
0.4
V
120
µs
60
mΩ
60
mΩ
–10
10
μA
1.8
V
MP28115 Rev. 0.92
www.MonolithicPower.com
2
8/23/2010
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.