MP38671 Datasheet, PDF (1/11 Pages) Monolithic Power Systems – 10A, 25V, 600KHz Step-Down Converter with Synchronizable Gate Driver

The Future of Analog IC Technology
MP38671
10A, 25V, 600KHz Step-Down Converter
with Synchronizable Gate Driver
DESCRIPTION
The MP38671 is a monolithic step-down switch
mode converter with a built in internal power
MOSFET. It achieves 10A continuous output
current over a wide input supply range with
excellent load and line regulation.
Current mode operation provides fast transient
response and eases loop stabilization.
Fault condition protection includes cycle-by-cycle
current limiting and thermal shutdown.
The MP38671 requires a minimum number of
readily available standard external components
and is available in a space saving 3 x4mm 14-pin
QFN package.
FEATURES
• Wide 4.5V to 25V Operating Input Range
• 10A Continuous Output Current
• 60mΩ Internal Power MOSFET Switch
• Power Good Indicator
• Synchronous Gate Driver Delivers up to
95% Efficiency
• Fixed 600KHz Frequency
• Synchronizable to >1MHz External Clock
• Cycle-by-Cycle Over Current Protection
• Thermal Shutdown
• Output Adjustable from 0.8V to 15V
• Stable with Low ESR Output Ceramic
Capacitor
• Available in a 3x4mm 14-Pin QFN Package
APPLICATIONS
• Point of Load Regulator in Distributed
Power System
• Digital Set Top Boxes
• Personal Video Recorders
• Broadband Communications
• Flat Panel Television and Monitors
For MPS green status, please visit MPS website under Quality Assurance.
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
4, 5, 6
IN
11
BST
12
VCC
8, 9, 10
SW
MP38671
2
PG
13
BG
OFF ON
3
EN/SYNC
GND
14
1
FB
100
95
90
85
80
75
70
0
2
4
6
8 10
MP38671 Rev. 1.1
www.MonolithicPower.com
1
9/21/2011
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2011 MPS. All Rights Reserved.