|
MP28369 Datasheet, PDF (1/8 Pages) Monolithic Power Systems – 2A, 16V, 1.4MHz Step-Down Converter | |||
|
TM
The Future of Analog IC Technology TM
DESCRIPTION
The MP28369 is a monolithic step-down switch
mode converter with a built-in internal power
MOSFET. It achieves 2A continuous output
current over a wide input supply range with
excellent load and line regulation.
Current mode operation provides fast transient
response and eases loop stabilization.
Fault condition protections include cycle-by-cycle
current limiting and thermal shutdown. In
shutdown mode the regulator draws 25μA of
supply current. Programmable soft-start
minimizes the inrush supply current and the
output overshoot at initial startup.
The MP28369 requires a minimum number of
readily available standard external components.
MP28369
2A, 16V, 1.4MHz
Step-Down Converter
FEATURES
⢠2A Output Current
⢠0.18⦠Internal Power MOSFET Switch
⢠Stable with Low ESR Output Ceramic
Capacitors
⢠90% Efficiency
⢠25μA Shutdown Mode
⢠Fixed 1.4MHz Frequency
⢠Thermal Shutdown
⢠Cycle-by-Cycle Over Current Protection
⢠Wide 4.75V to 16V Operating Input Range
⢠Output Adjustable from 0.92V to 16V
⢠Programmable Under Voltage Lockout
⢠Available in a Tiny MSOP Package
⢠Evaluation Board Available
APPLICATIONS
⢠Distributed Power Systems
⢠Battery Charger
⢠DSL Modems
⢠Pre-Regulator for Linear Regulators
âMPSâ and âThe Future of Analog IC Technologyâ are Trademarks of Monolithic
Power Systems, Inc.
TYPICAL APPLICATION
INPUT
4.75V to 16V
C5
10nF
4
2
IN
9 EN
BS
SW 5
MP28369
10 SS
7
FB
GND
COMP
C4
10nF
6
C6
OPEN
8
C3
1.8nF
D1
B220A
VOUT
2.5V/2A
MP28369_TAC_S01
Efficiency vs
Load Current
100
90
VOUT=5V
80
70 VOUT=3.3V
60
VOUT=2.5V
50
0
0.5 1.0 1.5 2.0
LOAD CURRENT (A)
MP28369_EC01
MP28369 Rev. 1.0
www.MonolithicPower.com
1
12/13/2007
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2007 MPS. All Rights Reserved.
|
▷ |