|
MP28367 Datasheet, PDF (1/9 Pages) Monolithic Power Systems – 1A, 21V, 1.4MHz Step-Down Converter in a TSOT23-6 | |||
|
TM
The Future of Analog IC Technology TM
DESCRIPTION
The MP28367 is a monolithic step-down switch
mode converter with a built-in internal power
MOSFET. It achieves 1A peak output current
over a wide input supply range with excellent
load and line regulation. Current mode
operation provides fast transient response and
eases loop stabilization. Fault condition
protection includes cycle-by-cycle current limiting
and thermal shutdown.
The MP28367 requires a minimum number of
readily available standard external components.
The MP28367 is available in TSOT23-6 packages.
MP28367
1A, 21V, 1.4MHz
Step-Down Converter in a TSOT23-6
FEATURES
⢠1A Output Current
⢠0.35⦠Internal Power MOSFET Switch
⢠Stable with Low ESR Output Ceramic
Capacitors
⢠Up to 90% Efficiency
⢠0.1μA Shutdown Mode
⢠Fixed 1.4MHz Frequency
⢠Thermal Shutdown
⢠Cycle-by-Cycle Over Current Protection
⢠6V to 21V Operating Input Range
⢠Output Adjustable from 0.81V to 15V
⢠Available in TSOT23-6 Packages
APPLICATIONS
⢠Distributed Power Systems
⢠Battery Charger
⢠Pre-Regulator for Linear Regulators
âMPSâ and âThe Future of Analog IC Technologyâ are Trademarks of Monolithic
Power Systems, Inc.
TYPICAL APPLICATION
VIN
12V
OFF ON
5
IN
1
BST
CB
10nF
6
SW
MP28367
D1
B230A
4
EN
GND
2
3
FB
VOUT
3.3V @ 1A
Efficiency vs
Load Current
100
95
VOUT = 5V
90
85
80
VOUT = 3.3V
75
70
65
60
55
VIN = 12V
50
10
100
1000
LOAD CURRENT (mA)
MP28367 Rev. 0.9
www.MonolithicPower.com
1
12/13/2007
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2007 MPS. All Rights Reserved.
|
▷ |