MP2371 Datasheet, PDF (1/10 Pages) Monolithic Power Systems – 1.8A, 24V, 700KHz Step-Down Converter

The Future of Analog IC Technology
DESCRIPTION
The MP2371 is a monolithic step-down switch
mode converter with a built-in internal power
MOSFET. It achieves 1.8A continuous output
current over a wide input supply range with
excellent load and line regulation. Current mode
operation provides fast transient response and
eases loop stabilization. Fault condition
protection includes cycle-by-cycle current limiting
and thermal shutdown.
The MP2371 requires a minimum number of
readily available standard external components.
The MP2371 is available in a 2mm x 2mm QFN8
package.
MP2371
1.8A, 24V, 700KHz
Step-Down Converter
FEATURES
• 2.5A Peak Output Current
• 1.8A Continuous Output Current
• 0.3Ω Internal Power MOSFET Switch
• Stable with Low ESR Output Ceramic
Capacitors
• 0.1µA Shutdown Mode
• Fixed 700KHz Frequency
• Thermal Shutdown
• Cycle-by-Cycle Over Current Protection
• Wide 4.5V to 24V Operating Input Range
• Output Adjustable from 0.81V to 15V
• Available in 2x2 QFN8 Package
APPLICATIONS
• Broadband Communications Equipment
• Digital Entertainment Systems
• Distributed Power Systems
• Battery Charger
• Pre-Regulator for Linear Regulators
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
VIN
GND
EN
3
IN
7
BST
SW ²
4
EN
GND
6
FB ⁵
D3
VOUT
GND
V_IN
I_{OUT_MAX}=1.8
MP2371 Rev. 1.0
www.MonolithicPower.com
1
5/26/2008
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2008 MPS. All Rights Reserved.