|
MP2365 Datasheet, PDF (1/11 Pages) Monolithic Power Systems – 3A, 28V, 1.4MHz Step-Down Converter | |||
|
The Future of Analog IC Technology
DESCRIPTION
The MP2365 is a 1.4MHz step-down regulator
with a built-in Power MOSFET. It achieves 3A
continuous output current over a wide input
supply range with excellent load and line
regulation.
Current mode operation provides fast transient
response and eases loop stabilization.
Fault condition protection includes cycle-by-
cycle current limiting and thermal shutdown.
Adjustable soft-start reduces the stress on the
input source at turn-on. In shutdown mode the
regulator draws 20µA of supply current.
The MP2365 is available in an 8-pin SOIC
package with an exposed pad, and requires a
minimum number of readily available external
components to complete a 3A step-down DC to
DC converter solution.
EVALUATION BOARD REFERENCE
Board Number
EV2365DN-00A
Dimensions
2.0â x 1.9â x 0.4â
MP2365
3A, 28V, 1.4MHz
Step-Down Converter
FEATURES
⢠3A Continuous Output Current, 4A Peak
Output Current
⢠Programmable Soft-Start
⢠100m⦠Internal Power MOSFET Switch
⢠Stable with Low ESR Output Ceramic
Capacitors
⢠Up to 90% Efficiency
⢠20µA Shutdown Mode
⢠Fixed 1.4MHz Frequency
⢠Thermal Shutdown
⢠Cycle-by-Cycle Over Current Protection
⢠Wide 4.75V to 28V Operating Input Range
⢠Output is Adjustable From 0.92V to 21V
⢠Under Voltage Lockout
APPLICATIONS
⢠Distributed Power Systems
⢠Battery Chargers
⢠Pre-Regulator for Linear Regulators
âMPSâ and âThe Future of Analog IC Technologyâ are Registered Trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
INPUT
4.75V to 28V
OPEN =
AUTOMATIC
STARTUP
2
1
10nF
7
IN
EN
BS
3
SW
8
SS
MP2365
5
FB
GND
COMP
4
6 B330A
OPEN
5.6nF
OUTPUT
3.3V
3A
Efficiency Curve
100
VOUT=5V
90
VOUT=3.3V
80
70
60
0
VIN=12V
0.5 1.0 1.5 2.0 2.5 3.0
LOAD CURRENT (A)
MP2365 Rev. 0.91
www.MonolithicPower.com
1
7/10/2006
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2006 MPS. All Rights Reserved.
|
▷ |