MP2361 Datasheet, PDF (1/8 Pages) Monolithic Power Systems – 2A, 23V, 1.4MHz Step-Down Converter

TM
The Future of Analog IC Technology ^TM
DESCRIPTION
The MP2361 is a monolithic step-down switch
mode converter with a built-in internal power
MOSFET. It achieves 2A continuous output
current over a wide input supply range with
excellent load and line regulation.
Current mode operation provides fast transient
response and eases loop stabilization.
Fault condition protections include cycle-by-cycle
current limiting and thermal shutdown. In
shutdown mode the regulator draws 20µA of
supply current. Programmable soft-start
minimizes the inrush supply current and the
output overshoot at initial startup.
The MP2361 requires a minimum number of
readily available standard external components.
EVALUATION BOARD REFERENCE
Board Number
EV2361DQ-00A
Dimensions
2.3”X x 1.5”Y x 0.5”Z
MP2361
2A, 23V, 1.4MHz
Step-Down Converter
FEATURES
• 2A Output Current with QFN Package
• 0.18Ω Internal Power MOSFET Switch
• Stable with Low ESR Output Ceramic
Capacitors
• 90% Efficiency
• 20µA Shutdown Mode
• Fixed 1.4MHz Frequency
• Thermal Shutdown
• Cycle-by-Cycle Over Current Protection
• Wide 4.75V to 23V Operating Input Range
• Output Adjustable from 0.92V to 16V
• Programmable Under Voltage Lockout
• Available in 10-pin QFN (3mm x 3mm) and
Tiny MSOP Packages
• Evaluation Board Available
APPLICATIONS
• Distributed Power Systems
• Battery Charger
• DSL Modems
• Pre-Regulator for Linear Regulators
“MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic
Power Systems, Inc.
TYPICAL APPLICATION
INPUT
4.75V to 23V
C5
10nF
4
2
IN
9 _EN
BS
SW ⁵
MP2361
10 _SS
7
FB
GND
COMP
C4
10nF
6
C6
OPEN
8
C3
1.8nF
D1
B220A
V_OUT
2.5V/2A
MP2361_TAC_S01
Efficiency vs
Load Current
100
90
V_OUT=5V
80
70 V_OUT=3.3V
60
V_OUT=2.5V
50
0
0.5 1.0 1.5 2.0
LOAD CURRENT (A)
MP2361-EC01
MP2361 Rev. 1.2
www.MonolithicPower.com
1
1/11/2006
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2006 MPS. All Rights Reserved.