MP2112 Datasheet, PDF (1/8 Pages) Monolithic Power Systems – 1MHz, 1A Synchronous Step-Down Converter

TM
The Future of Analog IC Technology ^TM
DESCRIPTION
The MP2112 is a 1MHz constant frequency,
current mode, PWM step-down converter. The
device integrates a main switch and a
synchronous rectifier for high efficiency without
an external Schottky diode. It is ideal for
powering portable equipment that powered by a
single cell Lithium-Ion (Li+) battery. The
MP2112 can supply 1A of load current from a
2.5V to 6V input voltage. The output voltage
can be regulated as low as 0.6V. The MP2112
can also run at 100% duty cycle for low dropout
applications.
The MP2112 is available in a space-saving
6-pin QFN package.
MP2112
1MHz, 1A Synchronous
Step-Down Converter
FEATURES
• High Efficiency: Up to 95%
• 1MHz Constant Switching Frequency
• 1A Available Load Current
• 2.5V to 6V Input Voltage Range
• Output Voltage as Low as 0.6V
• 100% Duty Cycle in Dropout
• Current Mode Control
• Short Circuit Protection
• Thermal Fault Protection
• <0.1µA Shutdown Current
• Space Saving 3mm x 3mm QFN6 Package
APPLICATIONS
• Cellular and Smart Phones
• Microprocessors and DSP Core Supplies
• PDAs
• MP3 Players
• Digital Still and Video Cameras
• Portable Instruments
“MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic
Power Systems, Inc.
TYPICAL APPLICATION
V_IN
2.5V to 6V
5 _VINA
6
EN
MP2112
4 _VINB
3
SW
2
GND
FB ¹
EN
V_OUT
1.8V/1A
MP2112_TAC_S01
Efficiency vs
Load Current
100
90 ^{VIN = 3.3V}
80
70
V_IN = 4.2V
60
50
40
30
20
10
0
10
100
1000
LOAD CURRENT (mA)
MP2112-EC01
MP2112 Rev. 1.2
www.MonolithicPower.com
1
3/6/2006
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2006 MPS. All Rights Reserved.