EV2106DQ-00A Datasheet, PDF (1/4 Pages) Monolithic Power Systems – 2.6V to 15V IN, 1.5A OUT Synchronous Buck Converter Evaluation Board

The Future of Analog IC Technology
EV2106DQ/DK-00A
2.6V to 15V IN, 1.5A OUT Synchronous
Buck Converter Evaluation Board
GENERAL DESCRIPTION
The EV2106DQ/DK-00A is an evaluation board
designed to demonstrate the abilities of the
MP2106DQ and MP2106DK synchronous buck
converters, respectively. It can convert an input
voltage with a range of 2.6V to 15V to a lower
output voltage from 0.9V while delivering 1.5A to
the load. The output voltage is preset to 1.8V,
but can be easily be adjusted to other levels
from 0.9V.
Fault condition protection includes cycle-by-cycle
current limiting, thermal shutdown and under
voltage lockout. The part’s current mode control,
high switching frequency and integrated
high-side and low-side power MOSFETs,
combined with tiny 10-pin MSOP or QFN
packages, provide a solution requiring a
minimum of components, board area and cost.
ELECTRICAL SPECIFICATIONS
Parameter
Input Voltage
Output Current
Symbol
V_IN
I_LOAD
Value
2.6 to 15
1.5
Units
V
A
FEATURES
• Up to 1.5A Continuous Output Current
• Wide 2.6V to 15V Operating Input Range
• Internal Power Switches
• 800KHz Fixed Switching Frequency
• All Ceramic Input and Output Capacitors
• Programmable Soft-Start
• Programmable Input Under Voltage Lockout
APPLICATIONS
• SOHO Routers, PCMCIA Cards, Mini PCI
• Handheld Computers
• PDAs
• Cellular Phones
• Digital Still and Video Cameras
• Small LCD Displays
“MPS” and “The Future of Analog IC Technology”, are Registered Trademarks of
Monolithic Power Systems, Inc.
EV2106DQ/DK-00A EVALUATION BOARD
Dimensions (2.4”X x 1.8”Y x 0.4”Z)
Board Number
MPS IC Number
EV2106DQ/DK-00A
MP2106DQ/DK
100
90 ^VIN=3.3V
80
70
60
V_IN=5V
50
40
30
20
10
0
10
100
1000
10000
LOAD CURRENT (A)
MP2106_TAC_EC02
EV2106DQ/DK-00A Rev. 1.3
www.MonolithicPower.com
1
11/18/2005
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2005 MPS. All Rights Reserved.