EV1527DR-02A Datasheet, PDF (1/5 Pages) Monolithic Power Systems – 1.3MHz Low Power LED Torch/Flash Driver

The Future of Analog IC Technology
DESCRIPTION
The EV1527DR-02A evaluation board is
designed to drive a single Lumileds LED with
low, forward voltage for Camera Flash
applications. The board is set up to obtain
150mA torch current and 750mA flash current
with an input voltage range of 3.0V to 4.2V. The
torch and flash currents can be adjusted by
resistors R2 and R3 on the Evaluation Board.
The MP1527 switches at 1.3MHz and allows
the use of tiny, low cost capacitors and small
inductors. External compensation and soft-start
result in small inrush current and extend the
battery life. The MP1527 operates from an input
voltage as low as 2.6V.
ELECTRICAL SPECIFICATIONS
Parameter
Supply Voltage
LED Current (Torch)
LED Current (Flash)
Symbol
V_IN
I_OUT1
I_OUT2
Value
3.0 – 4.2
150
750
Units
V
mA
mA
EV1527DR-02A
1.3MHz Low Power
LED Torch/Flash Driver
EVALUATION BOARD
FEATURES
• 3V to 4.2V Input Voltage Range
• Tiny Capacitors and Inductors Due to
1.3MHz Fixed Switching Frequency
• Output LED Currents: 150mA at Torch
Mode, 750mA at Flash Mode
• Surface-Mount Components
• Fully Assembled and Tested
APPLICATIONS
• Camera Phone Flash
• Handheld Computers and PDAs
• Digital Still and Video Cameras
• External Modems
• Small LCD Displays
• White LED Drivers
“MPS” and “The Future of Analog IC Technology” are Registered
Trademarks of Monolithic Power Systems, Inc.
EV1527DR-02A EVALUATION BOARD
Load Transient
V_IN = 3.6V (1 LED)
0
(L x W x H) 2.0” x 2.2” x 0.5”
0
(5.0cm x 5.6cm x 1.0cm)
Board Number
MPS IC Number
EV1527DR-02A
MP1527DR
V_FLASH
2V/div
V_OUT
5V/div
EV1527DR-02A_WF01
EV1527DR-02A Rev. 1.0
www.MonolithicPower.com
1
9/21/2005
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2005 MPS. All Rights Reserved.