MPS-03 Datasheet, PDF (1/2 Pages) MicroPower Direct, LLC – Single Output, 3W Ultra-Miniature SIP AC/DC Power Supplies

MPS-03 Series
Single Output, 3W
Ultra-Miniature SIP
AC/DC Power Supplies
Key Features:
• 3W Output Power
Electrical Specifications
Specifications typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Input
Parameter
Conditions
Min. Typ. Max. Units
• Universal 85-264 VAC Input
Input Voltage Range
• 100 - 400 VDC Input
See Note 1 85
100
264
VAC
400
VDC
• Meets IEC Safety Class II
• -40ºC to +85ºC Operation
• Single Regulated Output
• >300 kHour MTBF
• Ultra-Miniature SIP Case
Input Frequency
Input Current
Inrush Current, See Note 1
Leakage Current
Output
47
63
Hz
See Model Selection Guide
115 VAC
10
A
230 VAC
20
50
µA
Parameter
Conditions
Min. Typ. Max. Units
Output Voltage
See Model Selection Guide
Output Current
See Model Selection Guide
Output Voltage Accuracy
±2.0
%
Line Regulation
VIN = 10% to 100%
±0.5
%
Load Regulation
See Note 2
±1.0
%
Ripple & Noise (20 MHz)
3.3V And 5V Output Models
50
All Other Models
100
mV Pk - Pk
Hold Time, See Note 1
115 VAC 16
mS
230 VAC 40
Temperature Coefficient
±0.02
%/°C
Short Circuit Protection
Continuous (Autorecovery)
Over Temperature Protection
See Note 3
150
°C
General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
Input to Output, 60 Sec 2,000
VAC
Switching Frequency
100
kHz
Environmental
Parameter
Conditions
Min. Typ. Max. Units
Operating Temperature Range
Ambient -40 +25 +85
°C
MicroPower Direct
292 Page Street
Suite D
Stoughton, MA 02072
USA
Operating Temperature Range
Storage Temperature Range
Cooling
Humidity
Physical
Case
+90
°C
-40
+105
°C
Free Air Convection (See Derating Curve)
RH, Non-condensing
85
%
T: [phone]
F: [phone]
E: [e-mail]
W: www.micropowerdirect.com
Case Size
Case Material
Weight
Reliability Specifications
1.38 x 0.42 x 0.87 Inches (35.0 x 10.6 x 22.5 mm)
Non-Conductive Epoxy (UL94-V0)
1.24 Oz (35g)
Parameter
Conditions
Min. Typ. Max. Units
MTBF
MIL HDBK 217F, 25°C, Gnd Benign 300
kHours
Safety Class
IEC 61140 Class II
www.micropowerdirect.com